Remove/install rear floor covering

AR68.20-P-4800M

Remove/install rear floor covering

12.04.2019

Model

220

1

Front door sill molding

4

B-pillar paneling

7

Right rear passenger compartment footwell illumination

2

Door sill in the rear passenger compartment

5

Right ventilation duct cover

8

Left rear passenger compartment footwell illumination

3

Screw

6

Left ventilation duct cover

9

Floor covering

 

Remove/install

1

Activate Service mode in Tele-Aid emergency call system

AR82.95-P-0005-03AM

Information on Tele Aid emergency call system

Nur bei Code 347, 855

AH82.95-P-0001-01GA

 Only for code 347, 855.

 Danger

Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries

No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect battery ground line

AR54.10-P-0003I

Topical note

Notes on battery

AH54.10-P-0001-01A

 Turn key in electronic ignition lock EIS to position "0". Key cannot be withdrawn.

 Vehicle with code 889 (KEYLESS-GO):
Switch off engine, remove KEYLESS-GO cards from the vehicle, store outside of the transmission range.

 Installation: After connecting, read out fault memory, set time on the instrument cluster, code radio, normalize window lifter, and activate steering angle sensor.
Vehicles with stationary heater: adjust time display on stationary heater.

3

Remove front seats

Up to August 31, 2002

AR91.10-P-1000M

As of Septemper 1, 2002

AR91.10-P-1000MB

4

Remove center console

AR68.20-P-2000M

AR68.20-P-2000AM

5

Remove rear air conditioner housing

AR83.50-P-9020M

 For vehicles with code 582 air conditioning in the rear passenger compartment

6

Remove paneling on B-pillar

AR68.30-P-4700M

7

Remove rear seat cushion

AR91.12-P-1020MA

8

Remove rear seat cushion

AR91.12-P-1020M

 With code 401 for individual rear seats

9

Remove center bolster for individual seat

10

Remove right ventilation duct cover (5) and left ventilation duct cover (6) in the rear passenger compartment

11

Unclip right rear passenger compartment footwell illumination (7) and left rear passenger compartment footwell illumination (8)

 separate connectors

12

Lift rear floor covering (9) and remove toward the rear

13

Install in the reverse order

14

Make electrical system operational

AR00.19-P-0200M

 Perform basic programming (normalize window and sliding roof, etc.).

15

Deactivate service mode in TELE AID emergency call system

AR82.95-P-0005-03AM

 Only for code 347, 855.

16

Perform function test