P91.10-2519-09
1 Head restraint
2 Front seat
3 Cover
4 Belt end fitting
5 Screw
6 Grommet
7 Retaining clamp
N32/2 Right front seat adjustment control unit with memory
X28/34 Driver seat separation point buckle emergency tensioning retractor connector (2-pin)
X28/35 Front passenger seat separation point buckle emergency tensioning retractor connector (2-pin)
8 Pneumatic line plug coupling
9 Screw
10 Seat rail final cover
11 Cover
N32/1 Left front seat adjustment control unit with memory
| Remove/install | ||
Danger! | Risk of injury Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units | Store airbag unit with deployment face up, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply. | |
| Notes on performing repair, body work and welding on vehicles with airbags or emergency tensioning retractor units | Model 171, 199, 203, 209, 211, 215, 220, 230, 240, Model 463.243 /244 /245./246 /247 /248 /249 /250 /254 /309 /322 /323 /332 /333. | |
1.1 | Switch off ignition, remove ignition key | Vehicles without Keyless-Go, code 889. | |
1.2 | Switch off engine, remove transmitter key from vehicle | With Keyless-Go, code 889. Keep transmitter key out of transmitter range. | |
2 | Remove head restraint (1) | ||
3 | Adjust front seat (2) to front | Move front and rear seat cushions all the way up. Move backrest into upright position. | |
4 | Remove cover (3) at rear side paneling | ||
5 | Remove screw/bolt (5) at belt end fitting (4) | Screw/bolt at belt end fitting Installation: When screwing on, ensure that belt end fitting (4) remains mobile. | |
6 | Remove rear screws/bolts (9) from seat rails | Screw/bolt at seat rail. Remove cover (11) from seat rail. | |
7 | Turn retaining clamp (7) at Bowden cable in direction of transmission tunnel and remove | ||
8 | Unhook grommet (6) with Bowden cable from bracket | ||
9 | Position front seat (2) to rear | ||
10 | Remove front screw/bolt (9) from seat rails | Screw/bolt at seat rail. Remove cover (11) from seat rail. | |
11 | Pry off pneumatic line plug coupling (8) with open end wrench, size 7 | Slightly incline seat toward rear in vehicle. | |
12 | Detach connecting coupling (see arrow) from front seat adjustment control unit with memory, left (N32/1), right (N32/2) | Slightly incline seat toward rear in vehicle. | |
13 | Disconnect 2-pin driver seat connecting point buckle emergency tensioning retractor connector (X28/34), 2-pin front passenger seat connecting point buckle emergency tensioning retractor connector (X28/35) | Slightly incline seat toward rear in vehicle. | |
14 | Remove seat rail final cover (10) from seat rails | ||
15 | Lift front seat (2) and remove | ||
16 | Install in the reverse order | ||
17 | Check function of seat adjustment mechanism |
Front seats
Seat belts/emergency tensioning retractors
Henviste dokumenter
- ah9100p000201m Oplysninger om udførelse af reparations-, karrosseri- og svejsearbejde på køretøjer med airbag- eller selestrammerenheder
- as9100z000101a Fare for personskade ved kontrol- og reparationsarbejde på airbag- eller selestrammerenheder