P91.10-2011-09
1 Head restraint
2 Front seat
3 Cover
6 Cover
7 Screw
4 Belt end fitting
5 Screw
P91.10-2012-06
8 Pneumatic line
9 Retaining clamp
10 Seat adjustment mechanism
X55/3 Left front seat contacting strip
X55/4 Right front seat contacting strip
| Remove/install | ||
1 | Remove head restraint (1) | ||
2 | Adjust front seat (2) to front | ||
3 | Remove cover (3) above belt end fitting (4) | ||
4 | Remove bolt (5) from seat belt end fitting (4) | Screw/bolt at belt end fitting Installation: When screwing on, ensure that belt end fitting (4) remains mobile. | |
5 | Remove screws (7) at the back of the seat rails | Screw/bolt at seat rail. | |
6 | Remove covers (6) at rear of seat rails | ||
7 | Position front seat (2) to rear | ||
8 | Remove screws (7) at the front of the seat rails | Screw/bolt at seat rail. | |
9 | Remove covers (6) at front of seat rails | ||
10 | Detach plug connection from pneumatic line (8) and left front seat connector block (X55/3) and right front seat connector block (X55/4) from front seat cushion | Disconnect plug connection on pneumatic line (8) with 7 mm open end wrench. | |
11 | Detach retaining clamp (9) for Bowden cable seat belt height adjustment at seat adjustment mechanism (10) in direction of arrow | ||
12 | Lift front seat (2) and remove | ||
13 | Install in the reverse order |
Front seats
Number | Designation | Model | Model | |||
BA91.10-P-1001-01H | Bolt to seat runner | Nm | 50 | 45 | ||
Seat belts/emergency tensioning retractors