Serier
da
ar6000p070001ff
Sizes of gaps at hoods, doors and covers
Type ar · emne 60.00 · version 0100 · 2004-01-14
Gælder for: MODEL 454.0
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 3 Karrosseri › 60 Karrosseri generelt › 60.00 Generelt — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.20 Førerhus/karrosseri › 35.20.30 Førerhus — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.40 Fordør — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.41 Midterdør — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.43 Bagdør — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.44 Skydedør — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.45 Førerdør — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.46 Bagdør — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.47 Nøddør — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.48 Liftdør — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.35 Dør › 35.35.49 Bagagerumsdør — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.36 Hjelm/klap/dæksel › 35.36.30 Motorhjelm — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.36 Hjelm/klap/dæksel › 35.36.31 Frontklap — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.36 Hjelm/klap/dæksel › 35.36.33 Bagagerumsklap/bagklap — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.36 Hjelm/klap/dæksel › 35.36.34 tankklap/stikdåseklap — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.36 Hjelm/klap/dæksel › 35.36.60 Inspektionsklap/serviceklap — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.36 Hjelm/klap/dæksel › 35.36.61 Bagagerumsklap — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.51 Passagerdør 1 › 35.51.32 dørfløj/dørramme — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.52 Passagerdør 2 › 35.52.32 dørfløj/dørramme — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.53 Passagerdør 3 › 35.53.32 dørfløj/dørramme — Serie 454 (modeller 0**)
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.54 Passagerdør 4 › 35.54.32 dørfløj/dørramme — Serie 454 (modeller 0**)
AR60.00-P-0700-01FF
Sizes of gaps at hoods, doors and covers
Test and adjustment values
Number
Designation
Model 454.0
BE60.00-P-1001-01M
Size of gap
CBS front end to headlamps
Dimension "A"
mm
5.0 ( 2.5)
CBS front to front engine hood
Dimension "B"
mm
5.0 ( 1.5)
CBS front to side engine hood
Dimension "C"
mm
8.0 ( 1.5)
CBS front to A-pillar
Dimension "D"
mm
5.0 ( 1.0)
CBS front to cover
Dimension "E"
mm
3.0 ( 1.0)
BE60.00-P-1002-01M
Size of gap
Engine hood to cover
Dimension "F"
mm
4.0 ( 2.0)
Cover to A-pillar
Dimension "G"
mm
3.0 ( 1.0)
BE60.00-P-1003-01M
Size of gap
Front door to A-pillar
Dimension "H"
mm
8.0 ( 1.5)
Front door to entry
Dimension "I"
mm
8.0 ( 1.5)
Front door to rear door
Dimension "J"
mm
8.0 ( 1.5)
BE60.00-P-1004-01M
Size of gap
Rear door entry
Dimension "K"
mm
8.0 ( 1,5)
Rear door to C-pillar
Dimension "L"
mm
8.0 ( 1,5)
BE60.00-P-1005-01M
Size of gap
CBS rear end to C-pillar
Dimension "M"
mm
5.0 ( 1.0)
CBS rear end to tailgate
Dimension "N"
mm
7.0 ( 2.0)
BE60.00-P-1006-01M
Size of gap
Rear door to C-pillar
Dimension "O"
mm
6.5 ( 1.0)
Rear door to taillamp
Dimension "P"
mm
7.0 ( 1.0)
Tailgate to side CBS rear end
Dimension "Q"
mm
6.5 ( 2.0)
BE60.00-P-1007-01M
Size of gap
Taillamp to rear spoiler
Dimension "R"
mm
5.4 ( 1.5)
Taillamp to C-pillar
Dimension "S"
mm
3.0 ( 1.0)
BE60.00-P-1008-01M
Size of gap
Roof to rear spoiler
Dimension "T"
mm
6.5 ( 2.0)
Adjust hood, doors and trunk lid as shown in drawings. The gap should not run wedge-shaped or be too narrow at points. Deviations from parallel gap should be max. 1.0 mm over the entire length.
If the inside clearance is too large or too small, the movable body parts must be centered accordingly.
The reference measurements apply only for repair work on bodies damaged in accidents.
Adjust hood, doors and trunk lid as shown in drawings. The gap should not run wedge-shaped or be too narrow at points. Deviations from parallel gap should be max. 2.0 mm over the entire length.
If the inside clearance is too large or too small, the movable body parts must be centered accordingly.
The reference measurements apply only for repair work on bodies damaged in accidents.
