P35.30-2155-09
Shown on model 222.182 |
37 | Rear axle shaft | 37o | Retaining ring | |
37a | Protective ring | 50 | Rear axle gear | |
37m | Boot |
Notes on repair work on suspension components | |||
| Remove/install | ||
1 | Detach rear complete wheel | ||
2 | Unscrew collar nut of rear axle shaft (37) | Installation: Replace collar nut and secure after tightening. | |
Model 217 | |||
3 | Remove wheel carrier | ||
4 | Lever rear axle shaft (37) out of rear axle differential (50) and remove | | |
5 | Replace locking ring (37o) on inner spline profile | ||
| Check | ||
6 | Check constant velocity joints on rear axle shaft (37) | ||
7 | Check boots (37m) on rear axle shaft (37) | If the boot (37m) is damaged or leaky: | |
| |||
Replace boot (37m). | |||
8 | Check side radial shaft sealing ring in rear axle differential (50) | If damaged or leaking: | |
| |||
Replace side radial shaft sealing ring. | |||
9 | Install in the reverse order | ||
| Check | ||
10 | Check oil level in rear axle differential (50) and correct if necessary | ||
Filling capacity | |||
Sealant, Omnifit 100H (50 g) | |||
Loctite 7063 (400 ml) cleaning spray |
Henviste dokumenter
- ah0000p010001a Oplysninger om reparationsarbejde på chassiskomponenter
- ar3520p0115lf
- ar3530p066203lf
- ar3530p0662lf
- ar3531p052003lf
- ar3531p0545lf
- ar4010p1102a