Inspecting operating lever setting

Type ar · emne 27.60 · version 0102 · 1999-08-23

Gælder for: TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (G40) Automatic transmission W4A028 with CODE (GS4) Tip shift for automatic transmission TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (G40) Automatic transmission W4A028 with CODE (GS4) Tip shift for automatic transmission

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.60 Gearskifte, styring — Serie 601 (modeller 943) · Serie 602 (modeller 980) · Serie 903 (modeller 312, 362, 462, 463)

EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.30 skiftemodul/gearvælger/gearskiftestang/gearkabel — Serie 601 (modeller 943) · Serie 602 (modeller 980) · Serie 903 (modeller 312, 362, 462, 463)

Gælder også for motorer/gearkasser: 722 332, 722 337

AR27.60-D-0400A

Inspecting operating lever setting

16.10.97

TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission

TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission

D27.60-0012-05

A Operating lever for selector lever control cable

B Direction of movement of operating lever

C Shift cable

P Shift position "P" (park position)

	Checking
1	Detach selector lever control cable (C) from operating lever (A)
2	Check position of operating lever in park position	 Specified value: 52°36' relative to the groove in the drive shaft corresponds to 6 teeth on the drive shaft.
3	Switch on ignition Shift into all shift stages one after the other	 The operating lever (A) must approach the associated shift position corresponding to the shift stage.