Inspecting operating lever setting

Type ar · topic 27.60 · version 0102 · 1999-08-23

Applies to: TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (G40) Automatic transmission W4A028 with CODE (GS4) Tip shift for automatic transmission TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (G40) Automatic transmission W4A028 with CODE (GS4) Tip shift for automatic transmission

Where it sits

Function group 2 Chassis › 27 Automatic transmission › 27.60 Gearshift, control — Series 601 (models 943) · Series 602 (models 980) · Series 903 (models 312, 362, 462, 463)

EinPAS 17 Drivetrain/axle › 17.35 Shift mechanism/gear control › 17.35.30 Shift module/gearshift lever/shift rod/shift cable — Series 601 (models 943) · Series 602 (models 980) · Series 903 (models 312, 362, 462, 463)

Also applies to engines/gearboxes: 722 332, 722 337

AR27.60-D-0400A

Inspecting operating lever setting

16.10.97

TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission

TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission

D27.60-0012-05

A Operating lever for selector lever control cable

B Direction of movement of operating lever

C Shift cable

P Shift position "P" (park position)

	Checking
1	Detach selector lever control cable (C) from operating lever (A)
2	Check position of operating lever in park position	 Specified value: 52°36' relative to the groove in the drive shaft corresponds to 6 teeth on the drive shaft.
3	Switch on ignition Shift into all shift stages one after the other	 The operating lever (A) must approach the associated shift position corresponding to the shift stage.