AR20.10-G-2460NA | Remove/install coolant thermostat | 28.8.08 |
ENGINE 906.936 in MODEL 405.210 /230
for USA/Canada only
ENGINE 906.967 in MODEL 405.210 /230 with CODE (M03) Increased engine output,
for USA/Canada only
G20.10-3107-12
1 Coolant pump
2 Coolant thermostat
3 O-ring
4 Coolant line
5 Bolt
6 Coolant hose
| Remove/install | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of the cab as it is being tilted. Always tilt cab all the way to end position and secure with the safety strut. | |
1 | Tilt cab | ||
| Notes on tilting the cab | Model 405.210/230 with body 405.830 | |
Danger! | Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. | |
2 | Drain and collect coolant | Installation: Pour in coolant, see maintenance instructions. | |
| Notes on coolant | All engines | |
3 | Remove refrigerant line (4) | Collect coolant that flows out | |
4 | Remove coolant thermostat (2) | Installation: Install new O-ring (3). Pay attention to installation position of coolant thermostat (2); the vent opening (arrow) must always be pointing up. | |
5 | Test coolant thermostat (2) | ||
6 | Install in the reverse order | ||
7 | Check coolant level and correct if necessary | See service instructions. | |
8 | Inspecting cooling system for leaks |
Coolant pump, coolant thermostat
Henviste dokumenter
- ah2000n208001a Oplysninger om kølervæske
- ar2010g2455na
- ar6080g0010na
- as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes