ar6080g0010na

Tilt cab to repair position, tilt back

Type ar · emne 60.80 · version 0201 · 2019-05-13

Gælder for: Model 405.210/230 with body 405.830 For USA/Canada only

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 60 Karrosseri generelt › 60.80 Førerhus, førerhuslejring — Serie 405 (modeller 210, 230, 830)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.50 førerhuslejring/-tipanlæg/-luftaffjedring › 35.50.40 Førerhusophæng/førerhus-tipanlæg — Serie 405 (modeller 210, 230, 830)

AR60.80-G-0010NA

Tilt cab to repair position, tilt back

26.04.2019

Model

405.210/230 with body 405.830

For USA/Canada only

Modification notes

11.02.2003

Info added and picture of safety strut changed

Step 4

Tilt cab to repair position, tilt back
Tilt cab to repair position, tilt back

G60.80-3143-01

1

Hydraulic pump

2

Selector lever

3

Safety strut

G60.80-3344-01

Tilt cab

Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut.

AS60.80-Z-0001-01A

Topical note

Notes on tilting the cab

AH60.80-N-0003-01B

1

Raise front-end flap and secure

See Service Instructions

2

Move selector lever (2) of hydraulic pump (1) to "Lift" position


Pay attention to loose objects in cab.
Otherwise the windshield can be damaged.

Move selector lever (2) to "Lower" position.

3

Install tool (SW 30) on hydraulic pump (1) and pump up cab

The vehicle lock is unlocked by the hydraulic pump (1). Pump up cab to end stop.

Actuate hydraulic pump (1) until cab is positioned forward to the front of the vehicle and a strong resistance is felt.

4

Install safety support (3) on piston rod

Observe installation position of safety strut, see adhesive label.

5

Lower in reverse sequence

Ensure sufficient unobstructed movement of lines, hoses, etc.

Henviste dokumenter