Represented in 384 model |
1 | Cooling system reservoir cover |
B20.00-0037-11
2 | Draining plug (engine block) |
3 | Draining plug (radiator) |
B20.00-0053-01
B20.00-0011-01
Drain | |||
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | Notes on coolant | ||
1 | Open the expansion tank's (1) cap | If the vehicle is equipped with heating, actuate the command to the open position. | |
2 | Unfasten the draining plug (2) from the engine block | Connect the draining plug flow hose (2), open it and collect the coolant in an appropriate recipient. | |
3 | Remove the draining plug (3) from the radiator | Collect the coolant in an appropriate recipient. | |
4 | Remove grease and residues from cooling system |
| |
Recommended procedure, when the cooling system presents high content of residues or oil contamination. | |||
Refill | |||
5 | Install the radiators coolant draining plug (3) | Replace the sealing ring. | |
.Coolant draining plug in the radiator | |||
6 | Tighten the engine block coolant draining plug (2) | .Engine block coolant drain plug | |
7 | Supply with coolant | Supply the cooling system until reaching the expansion tank's maximum level reference mark. | |
Pay attention to the concentration of the anti-corrosion/antifreeze product. | |||
.Cooling system - Approximate level | |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Let the engine operate for 1 or 2 minutes | Allow the engine to operate in varied rpm ranges. | |
If necessary, replenish the coolant. | |||
9 | Check the tightness of the cooling system |
| |
10 | Install the supply mouth cap in the expansion tank |
Engine cooling system capacity |
Number | Designation | Engine 904.924/957 in Type 688.27 Engine 904.978 in Type 384 | Engine 904.920/968, 924.912/929 in Type 384 | |||
BF20.00-B-1001-01F | Cooling system - Approximate level | Vehicles without retarder | Litros | 20 | 27 | |
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | 50 | 50 | ||
Anti-corrosion CLASS MB 312.0 | % | 10 | 10 | |||
Product already diluted | Anti-corrosive/anti-freeze CLASSES MB 326.0, MB 326.3 | Litros | 20 | 27 | ||
Vehicles with retarder | Litros | - | - | |||
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | - | - | ||
Anti-corrosion CLASS MB 312.0 | % | - | - |
Engine cooling system capacity |
Number | Designation | Engine 924.919 in Type 384 | |||
BF20.00-B-1001-01F | Cooling system - Approximate level | Vehicles without retarder | Litros | 27 | |
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | 50 | ||
Anti-corrosion CLASS MB 312.0 | % | 10 | |||
Product already diluted | Anti-corrosive/anti-freeze CLASSES MB 326.0, MB 326.3 | Litros | 27 | ||
Vehicles with retarder | Litros | - | |||
Do not mix products between classes | Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5 | % | - | ||
Anti-corrosion CLASS MB 312.0 | % | - |
Henviste dokumenter
- ah2000n208001a Oplysninger om kølervæske
- ar2000b1010xa
- ar2000b1030xa
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske