1 | Electrical connector |
2 | Engine oil cooler housing |
3 | Cable set holder |
T18.30-0005-10
4 | Oil filler screw on oil filter head |
5 | Oil drain screw on oil filter bowl |
6 | Seal |
7 | Oil cooler |
8 | Engine oil cooler drain screw |
9 | Screws for engine oil cooler housing |
T18.30-0006-10
| Remove/install | ||
1 | Remove engine compartment encapsulation below engine oil cooler and exhaust manifold | ||
2 | Remove electrical connectors (1) from engine oil cooler housing (2) | ||
3 | Remove cable set holder (3) from engine oil cooler housing | ||
4 | Unscrew oil filler screw (4) on oil filter head | First, carefully clean area around oil filler screw. | |
Oil filler screw on oil filter head | |||
5 | Remove oil drain screw (5) on oil filter bowl | ||
Notes on engine oil | Engine 447, 489 in model 671 | ||
Drain off engine oil (from oil filter) and catch with a suitable container | |||
Installation: Replace sealing ring for oil drain screw, | |||
Oil drain screw on oil filter bowl | |||
Fill oil filter with engine oil via oil filler opening | |||
| |||
Notes on engine oil | |||
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
6 | Remove coolant drain plug (8) from engine oil cooler housing | ||
Topical note | Notes on coolant | ||
Drain coolant and collect in a suitable container. | |||
Installation: Replace sealing ring for coolant drain plug, | |||
Drain screw on oil cooler | |||
Filling capacity for coolant | |||
7 | Remove screws (9) and remove engine oil cooler housing (2) from cylinder crankcase | Installation: Replace spring lock washers. | |
Bolt, oil cooler housing to crankcase | |||
8 | Remove seal (6) from engine oil cooler housing | Installation: Replace seal. | |
9 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Check oil cooler for leaks | Leave engine running while doing so. | |
11 | Check engine oil level, fill up if necessary | ||
Notes on engine oil | Engine 447, 489 in model 671 | ||
Engine oil | |||
12 | Check coolant, fill up if necessary | Filling capacity for coolant |
Henviste dokumenter
- ah1800n010101f
- ah2000n208001a Oplysninger om kølervæske
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske