Shown with engine 780.701 |
1 | Heat exchanger |
S20.00-A000-81
S20.00-A001-78
Shown with engine 780.701 |
1 | Heat exchanger | 5 | Nut | 8 | Refrigerant line | ||
2 | Expansion valve | 6 | Refrigerant line | 9 | Coolant hose lines | ||
3 | Electrical connector | 7 | Nut | 10 | Bolts | ||
4 | Electrical connector |
Shown on removed heat exchanger (1) |
1 | Heat exchanger |
2 | Expansion valve |
S20.00-A002-71
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of fire due to ignition of R1234yf refrigerant on hot components. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with escaped R1234yf refrigerant and when working on pressurized parts. Risk of explosion due to formation of ignitable refrigerant/air mixtures | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated. | |
Warning | Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.Engine 780.701 in model 447 | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Procedure for a damaged or leaky air conditioning system | ||
Topical note | Protect air conditioning circuit and components from moisture when carrying out repair work | ||
Notes on handling refrigerant R1234yf | |||
Notes on handling refrigerant R134a | Engine 780.701 in model 447 | ||
| Remove/install | ||
1 | Drain refrigerant circuit. |
| |
2 | Drain coolant of high-voltage battery cooling system. |
| |
Engine 780.702 in model 447 | |||
3 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
4 | Disconnect electrical connectors (3, 4). | ||
5 | Remove nut (5) of refrigerant line (6). | Nut, refrigerant line to expansion valve for high-voltage battery | |
6 | Remove refrigerant line (6) at expansion valve (2). | ||
| Compressor oils (specification 362.1) | ||
Plug openings. | |||
Installation: Install new sealing ring and coat with compressor oil. | |||
Record plug | |||
7 | Remove nut (7) of refrigerant line (8). | Nut, refrigerant line to expansion valve for high-voltage battery | |
8 | Remove refrigerant line (8) at expansion valve (2). | ||
| Compressor oils (specification 362.1) | ||
Plug openings. | |||
Installation: Install new sealing ring and coat with compressor oil. | |||
Record plug | |||
9 | Remove coolant hose lines (9) at heat exchanger (1). | ||
Collect escaping coolant using suitable vessel. | |||
Set of protective covers | |||
10 | Remove screws (10). | Bolt, heat exchanger of high-voltage battery cooling system to holder | |
11 | Remove heat exchanger (1) with attached expansion valve (2) and pressure and temperature sensor. | The heat exchanger (1) is delivered as a replacement part with expansion valve (2) and pressure and temperature sensor. | |
12 | Install in the reverse order. |
001 589 01 91 00
Set of protective covers
129 589 00 91 00
Record plug
Henviste dokumenter
- ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ah8330n000301a Oplysninger om håndtering af kølemidlet R134a
- ah8330n000401a Fremgangsmåde ved beskadiget eller utæt klimaanlæg
- ah8330n000501a Klimaanlæggets kredsløb og komponenter skal beskyttes mod fugt ved reparationer
- ah8330p000302a Oplysninger om håndtering af kølemiddel R1234yf
- ar0850s0021f
- ar0850s0022g
- ar0850s8001f
- ar2020p744101rq
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)
- as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske
- as8300z000601a Fare for forgiftning ved indånding af overophedede kølemiddeldampe fra et klimaanlæg, der er påfyldt R134a. Fare for personskade ved hud- og øjenkontakt med flydende kølemiddel R134a og ved håndtering af dele, der er under tryk.
- as8300z000701a Brandfare som følge af antænding af kølemiddel R1234yf på varme dele. Fare for forgiftning ved indånding af overophedet kølemiddeldamp. Fare for personskade ved hud- og øjenkontakt med frigjort kølemiddel R1234yf og ved håndtering
- bb0040p036201a