Remove/install headliner

AR68.30-P-4300TD

Remove/install headliner

25.7.06

1.3.06

Remove paneling from B-pillar changed to disconnect

Steps 7, 17

 

Remove/install



Note on function reliability of windowbag

AH91.60-P-0693-01A

1.1

Completely open tilting/sliding roof

Only on vehicles with code (414) Electric glass tilting/sliding roof.

2

Completely move driver and passenger seat toward front

3

Remove A-pillar paneling at top left

AR68.30-P-4050T

4

Remove left front handle from roof

AR68.30-P-4330T

5

Completely remove edge guard (6) from left front door cutout.

6

Completely remove edge guard (5) from left rear door cutout

7

Loosen paneling from left B-pillar

 Do not remove belt end fitting.

AR68.30-P-4700T

8

Remove left rear grab handle from roof

AR68.30-P-4330T

9

Unscrew bolt (2) and remove left front safety net bracket (3) together with frame (4)



*BA68.50-P-1002-04A

10

Unscrew bolt (2) and remove left or right rear safety net bracket (3) together with frame (4)



*BA68.50-P-1002-04A

11

Remove paneling from left D-pillar.

AR68.30-P-4495T

12

Remove left side paneling in rear

AR68.30-P-4780T

13

Remove right rear grab handle from roof.

AR68.30-P-4330T

14

Completely remove edge guard (6) from right front door cutout.

15

Completely remove edge guard (5) from right rear door cutout.

16

Loosen paneling from right B-pillar.

 Do not remove belt end fitting.

AR68.30-P-4700T

17

Remove A-pillar paneling at top right

AR68.30-P-4050T

18

Remove right front handle from roof.

AR68.30-P-4330T

19

Unscrew bolt (2) and remove right front safety net bracket (3) together with frame (4)



*BA68.50-P-1002-04A

20

Remove paneling on right D-pillar

AR68.30-P-4495T

21

Remove rear dome lamp

AR82.20-P-0113T

22

Remove left and right sun visor (7).

23

Remove sun visor bracket (8) from left and right sun visor (7).

24

Remove overhead control panel control unit

AR82.20-P-1000T

25

Unscrew screws (9) and remove inside rearview mirror carrier (10).

26.1

Remove front apex seal (11) from tilting/sliding roof

Only on vehicles with code (414) Electric glass tilting/sliding roof.

27

Expose electrical lines (12)

 Number of electrical lines (12) depending on vehicle equipment.
The electrical lines (12) are routed along the left C-pillar to the headliner (1).

28

Disconnect electrical connectors from electrical lines (12)

 Number of electrical connectors according to vehicle equipment.

29.1

Expose electrical connector on speaker wiring harness (13) on left D-pillar and disconnect electrical connector on speaker wiring harness (13).

Only on vehicles with code (810) Sound system.

30

Pull headliner (1) down on both dies in area between C and D-pillar and loosen from Velcro strips (17).

 Pull down headliner (1) carefully. Otherwise the headliner (1) can be damaged

31

Slide headliner (1) toward front until retaining hooks (14) release

 Support headliner (1) in rear area with aid of helper. Danger of breaking retaining hooks (14) when they are not completely moved out of the mounts (15) in the roof frame (16).

 Installation: Ensure that retaining hooks (14) are seated correctly in mounts (15) in roof frame (16).

32

Remove headliner (1) from vehicle toward rear and lay down on clean subsurface.

 Aid of helper required.

33.1

Prepare roof paneling (1) for installation

When replacing roof paneling (1).

AR68.30-P-4305T

34

Install in the reverse order

Number

Designation

Model 211.2

BA68.50-P-1002-04A

Bolt, safety net bracket to bracket

Nm

8