Remove/install paneling on B-pillar

AR68.30-P-4700T

Remove/install paneling on B-pillar

25.11.09

25.7.03

Operation incorporated

Step 17



Removing

1

Position seat toward front and move rear seat surface upward

2

Remove cover (1) from front seat with assembly wedge (9)



*110589035900

3

Remove the screw (2) and remove belt end fitting

4

Remove edge guard (3) in area of B-pillar paneling (8) on both sides

5.1

Remove air intake grate (4) from B-pillar paneling (8)

On vehicles with code (581b) convenience automatic air conditioning

6

Remove front door sill trim (10) and rear door sill trim (11)

 Lift front door sill trim (10) and rear door sill trim (11) out toward B-pillar paneling (8)

7

Press B-pillar paneling (8) off of clips (5, 6) and B-pillar with assembly wedge



*110589035900

8

Move seat belt (7) through B-pillar paneling (8)

9

Remove clips (5) from B-pillar



*110589035900

10

Remove clips (6) from B-pillar paneling (8)



Install

11

Insert clips (6) into B-pillar

12

Insert clips (5) into B-pillar paneling (8)

13

Move seat belt (7) through B-pillar paneling (8)

14

Clip B-pillar paneling (8) into B-pillar

 The bolt (13) should be inserted into the mount (12) and the button (14) into the locking pawl (15).
Ensure that clips (5, 6) are seated correctly.

15

Check seat belt height adjustment at B-pillar for proper function

 It should be possible to adjust and arrest the belt height adjustment.

16

Install front door sill trim (10) and rear door sill trim (11)

17.1

Insert air intake grate (4) into B-pillar paneling (8)

On vehicles with code (581b) convenience automatic air conditioning

18

Install edge guard (3) on B-pillar on both sides

19

Insert belt end fitting and tighten with bolt (2) to front seat



*BA91.40-P-1001-01A

20

Install covering (1)

Number

Designation

Model
211.0

Model
211.2

BA91.40-P-1001-01A

Screw on belt end fitting

Nm

32

32