AR46.10-P-0100AM | Remove/install steering wheel | 13.1.10 |
MODEL 215.374 /379, 220.074 /174 /179
MODEL 230.479 up to 28.1.08 except CODE (809) Model year 2009
P46.10-2389-01
P46.10-2003-01
P46.10-2004-01
1 Cage
2 Steering wheel gear shift connectors
A45 Fanfare horns and airbag clock spring contact
32 Steering wheel
32c Countersunk screw
| Remove/install | ||
1 | Remove airbag unit from steering wheel (32) | Model 215, 220 | |
Model 230.4 | |||
2 | Move steering wheel (32) to horizontal position | Front wheels in straight ahead position | |
3 | Remove cage (1) | Installation: Ensure that no cables are trapped. | |
4 | Disconnect steering wheel gear shift connectors (2) | ||
5 | Remove countersunk screw (32c), steadying steering wheel (32). | Installation: Replace countersunk bolt (32c). | |
| |||
6 | Remove steering wheel (32) | Do not pay attention to the markings on the upper steering shaft. | |
Installation: The front wheels must be in the straight-ahead position. Fit steering wheel (32) horizontally onto steering shaft. The recesses in the splines (arrows) run vertically. | |||
7 | Check fanfare horns and airbag clock spring contact (A45) for damage | When the steering wheel (32) is detached, the fanfare horns and airbag clock spring contact (A45) must not be twisted, otherwise it will be damaged. | |
Replace damaged fanfare horns and airbag clock spring contact (A45), see: | |||
Remove/install clock spring contact | |||
8 | Install in the reverse order | ||
9 | Conduct a road test | Tests during the road test: | |
Turn signal reset When the steering wheel is offset by more than 1 tooth, satisfactory resetting of the turn signal is no longer guaranteed. | |||
Airbag indicator lamp The SRS indicator lamp must not light up on full steering lock in both directions. | |||
Steering wheel position (32) If the steering wheel (32) is crooked, adjust it by max. 1 tooth. |
Steering wheel