ar4330t0015b

Remove/install coolant temperature sensor

Typ ar · téma 43.30 · verze 0105 · 2011-06-14

Platí pro: MODEL 613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000188xx, H67.1500xx MODEL 613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000188xx, H67.1500xx MODEL 613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated) Voith Retarder VR 115 E - 153.000188xx, H67.1500xx MODEL 613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retar

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 43 Vzduchotlaková část brzd a přídavné brzdy › 43.30 Retardér (hydraulický) — Řada 613 (modely 355, 358, 364, 365, 388, 455, 485)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.21 Retardér › 21.21.12 Snímač/spínač/kabelový svazek — Řada 613 (modely 355, 358, 364, 365, 388, 455, 485)

Platí také pro motory/převodovky: 714 120, 714 140, 714 66*, 714 69*

AR43.30-T-0015B

Remove/install coolant temperature sensor

8.6.11

MODEL 613.355 with TRANSMISSION 714.66 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL 613.355 /365 /455 /485 with TRANSMISSION 714.69 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL 613.364 with TRANSMISSION 714.120 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

MODEL 613.358 /388 with TRANSMISSION 714.140 with CODE (B10) Voith retarder R115 (integrated)
Voith Retarder VR 115 E - 153.000188xx, H67.1500xx

Remove/install coolant temperature sensor

T43.30-0023-01

1 Water temperature sensor (B93/1)

2 Sealing ring A14x20

3 Heat exchanger

Remove/install

Danger!

Risk of scalding from hot coolant spraying out

Do not open cap of the expansion reservoir or radiator unless coolant temperature is below 90 °C. Turn cap carefully to the first detent or slacken one turn. Wear protective clothing.

AS20.00-Z-0001-01A

1

Switch off ignition

2

Drain coolant

Notes on coolant

All engines

AH20.00-N-2080-01A

3

Detach electrical line from coolant temperature sensor (1)

4

Remove coolant temperature sensor (1) from lower coolant connection

Installation: Replace sealing ring (2).

*BA43.30-N-1011-01D

5

Install in the reverse order

6

Pour in coolant

Notes on coolant

All engines

AH20.00-N-2080-01A

7

Conduct a road test

Bleed retarder:

-If present and possible, switch off retarder foot control.

-Drive vehicle at 50 km/h.

-Switch on retarder in first brake stage 5 times for approx. 5 seconds each.

Retarder (hydraulic)

Number

Designation

Model 613
with code B10

BA43.30-N-1011-01D

Coolant temperature sensor to retarder coolant connection

Nm

30

Odkazované dokumenty