ar4330g0004oha

Inspect shaped breather

Typ ar · téma 43.30 · verze 0100 · 2017-02-04

Platí pro: Model 000.001 with transmission 714.140/143 Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 43 Vzduchotlaková část brzd a přídavné brzdy › 43.30 Retardér (hydraulický) — Řada 000 (modely 001)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.21 Retardér › 21.21.30 Skříň/víko/hřídel/retardér — Řada 000 (modely 001)

Platí také pro motory/převodovky: 714 140, 714 143

AR43.30-G-0004OHA

Inspect shaped breather

22.01.2017

Model	000.001 with transmission 714.140/143
	Transmission with hydrodynamic retarder R115 E (integrated), Voith- 153.000188xx, H67.1500xx

Inspect shaped breather

1	Valve insert
2	Float
3	Test ring

W43.30-1060-01

	Check
1	Remove profile ventilation		AR43.30-G-0003OHA
2	Check float (2) for surface damage (arrow)	If there are problems
		
		Replace the complete profile ventilation.
3	Weigh float (2) using a suitable digital scale and compare with specified value	Specified value for float weight	*BE43.30-N-1004-01B
		If this is not the case
		
		Replace the complete profile ventilation.
4	Place valve element (1) on float (2), weight it with test ring (3) and fill cavity between float (2) and upper edge of valve element with commercially available spirit	 Commercially available devices/tools Test ring (3) Order number H67.2757xx Voith D-74564 Crailsheim
		If the fluid level changes within one minute.
		
		Replace the complete profile ventilation.
5	Install profile ventilation		AR43.30-G-0003OHA

Check values for retarder/hydrodynamic retarder, hydraulic

Number	Designation		Model 000.001 with transmission 714.140/143 Transmission with hydrodynamic retarder
BE43.30-N-1004-01B	Specified value for float weight	g	11 (1)

Odkazované dokumenty

ar4330g0003oha