1 | Screw |
2 | Cover, shaped breather |
3 | Seal |
4 | Hydrodynamic retarder housing |
5 | Air pipe |
6 | O-ring |
7 | Valve insert |
8 | Float |
9 | Float retainer |
10 | O-ring |
11 | Shaped breather |
12 | Oil reservoir cover |
T43.30-0013-11
| Remove | ||
1 | Remove proportional valve | ||
2 | Remove bolts (1) | ||
3 | Remove profile ventilation cover (2) with seal (3) | ||
4 | Remove air pipe (5) and detach O-rings (6) | ||
5 | Pull out valve element (7) and detach O-ring (10) | Impact extractor | |
Adapter | |||
6 | Remove float (8) and float cage (9) | ||
| Clean | ||
7 | Clean sealing surfaces on profile ventilation cover (2) and hydrodynamic retarder housing (4) | ||
| Check | ||
8 | Check profile ventilation (11) | ||
| Install | ||
9 | Coat O-ring (10) with vaseline and pull onto valve element (7) | VASELINE / DBL 6850.00 | |
10 | Insert float (8) and float cage (9) into valve element (7) | ||
11 | Insert profile ventilation (11) into hydrodynamic retarder housing (4) and drive in | Impact extractor | |
Adapter | |||
12 | Attach new O-rings (6) to air pipe (5) | ||
13 | Insert air pipe (5) into oil reservoir cover (12) | ||
14 | Fit new seal (3) on hydrodynamic retarder housing (4) | ||
15 | Fit profile ventilation cover (2) on air pipe (5) and fasten to hydrodynamic retarder housing (4) with screws (1) | Screw/bolt, profile ventilation cover to housing of hydrodynamic retarder | |
16 | Install proportional valve |
715 589 05 63 00
Adapter
715 589 04 63 00
Impact extractor