ar4010p1080tx

Draining TIREFIT sealant out of tires

Typ ar · téma 40.10 · verze 0202 · 2011-02-11

Platí pro: MODEL 219.3 except CODE (669) Spare tire on steel rim except CODE (690) Compact spare tire as emergency wheel

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 40 Kola, měření geometrie podvozku › 40.10 Kola, pneumatiky — Řada 219 (modely 3**)

EinPAS 20 Podvozek › 20.30 Kolo/pneumatika › 20.30.30 Kolo/pneumatika/náhradní kolo — Řada 219 (modely 3**)

EinPAS 20 Podvozek › 20.30 Kolo/pneumatika › 20.30.35 Plnicí kompresor/opravárenská sada — Řada 219 (modely 3**)

AR40.10-P-1080TX

Draining TIREFIT sealant out of tires

11.2.11

MODEL 219.3
except CODE (669) Spare tire on steel rim
except CODE (690) Compact spare tire as emergency wheel

Draining TIREFIT sealant out of tires

P40.10-3420-02

1 Tire sealant container

2 Hose

3 TIREFIT tire sealant

Drain

Danger!

Risk of poisoning caused by swallowing the TIREFIT emulsion. Risk of injury caused by skin contact and eye contact with the TIREFIT emulsion. Risk of fire caused by ignition of the TIREFIT emulsion

Do not swallow or come into contact with the TIREFIT tire sealant, which is an emulsion of rubber and terpene phenolic resin. No open fire or open light sources.

AS40.10-Z-0001-01A

1

Remove wheel.

Remove/install wheels

AP40.10-P-4050TX

2

Put tire down with valve facing upwards

In order to prevent TIREFIT tire sealant (3) spraying out when unscrewing the valve element.

TIREFIT tire sealant

AH40.10-P-0001-01A

3

Remove valve element from valve and release pressure from the wheel

4.1

Unscrew union nut of the valve body and press the valve body into the wheel

With tire pressure monitor, code 475

4.2

Pull valve out of the disk wheel

Without tire pressure monitor

Do not damage surface of the disk wheel.

Push the valve debris remaining in the valve bore of the disk wheel into the inside of the wheel.

5

Wheel with valve bore pointing downwards upright for 10 minutes and put down raised slightly

Place wheel slightly higher, in order to make it easier to suction off the tire repair kit TIREFIT (3).

6

Attach hose (2) to empty tire sealant container (1)

Replace the original hose of the tire sealant container (1) with a hose (2) 400 mm long.

7

Compress the tire sealant container (1) and immerse hose (2) through the valve bore of the disk wheel into the TIREFIT tire sealant (3)

8

Reduce pressure on the tire sealant container (1) and suction off TIREFIT tire sealant (3)

Position tire sealant container (1) under the wheel in order to make it easier to suction off the TIREFIT tire sealant (3).
Approx 90 % of the TIREFIT tire sealant (3) is removed.

9

Bore the tire tread with a twist drill bit (10 mm dia.) and allow TIREFIT tire sealant (3) to flow into a suitable container

If an empty tire sealant container (1) is not available

Clean

10

Clean disk wheel

Remove the remains of the TIREFIT tire sealant (3) using a damp cloth

11

Replace TPM wheel sensor

With tire pressure monitor code 475 (Beru system only)

AR40.15-P-0080A

In the process, observe tightening torque values for the different gasket versions, see:

Gasket of valve body modified.

BT40.15-P-0080-01A

12

Replace tires

AR40.10-P-1030TX

13

Place new tire repair kit TIREFIT (3) in the vehicle

See:

TIREFIT tire sealant - check expiry date

AP40.10-P-4054R

Odkazované dokumenty