AP47.20-D-0780A | Replace fuel filter | 23.8.11 |
ENGINE 104.900, 111.948 /950 /978 /980 in MODEL 638
ENGINE 111.979 /984 in MODEL 901, 902, 903, 904
N07.57-2170-01
N07.57-2098-01
N07.57-2099-01
Shown on fuel filter (1) with hose connections in model 638
1 Fuel filter
2 Rubber connecting hoses
3 Mounting screw
Shown on fuel filter (1) with screw-in fittings in models 901, 902, 903, 904
1 Fuel filter
2 Rubber connecting hoses
2a Screw connections
3 Mounting screw
Shown on fuel filter (1) with hose connections in models 901, 902, 903, 904
1 Fuel filter
2 Rubber connecting hoses
3 Mounting screw
| Remove/install | ||
Danger! | Risk of explosion caused by ignition of flammable products, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel. | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
1 | Switch off ignition | ||
2 | Open filler cap. | Relieve pressure in the fuel tank. | |
3 | Pinch off fuel lines | Clamp off fuel lines upstream and downstream of fuel filter (1) at rubber connecting hoses (2). | |
The plastic lines must not be clamped. | |||
Clamping device | |||
4.1 | Unfasten rubber connection hoses (2) from fuel filter (1) and disconnect | Fuel filter (1) with hose connections | |
Collect escaping fuel. Seal off connections on fuel filter (1) using plugs. | |||
Installation: Replace rubber connecting hoses (2) according to findings. | |||
4.2 | Unscrew screw connections (2a) of fuel lines from fuel filter (1) | Fuel filter (1) with screw-in fittings | |
Collect escaping fuel. Seal off fuel lines and line connections on fuel filter (1) using plugs. | |||
5 | Loosen bolt (3) and remove fuel filter (1) from bracket | Installation: Observe the direction of flow. Arrows on the fuel filter housing indicate the direction of flow. | |
The adhesive tape on the fuel filter (1) must overlap the bracket by equal amounts on either side. | |||
6 | Install in the reverse order | ||
7 | Start engine | ||
| Checking | ||
8 | Check leaktightness of fuel filter (1) |
000 589 40 37 00
Circuit
Odkazované dokumenty
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru
- as4700z000101a Nebezpečí výbuchu při vznícení, nebezpečí otravy při vdechnutí a požití paliva inebezpečí úrazu v důsledku přímého doteku kůže a očí s palivem