SM54.21-W-4100B | Equation 100: Engine start | 8.10.03 |
MODEL All
with parameterizable special module (PSM), diagnosis version 6
Engine start (Pin X2 18/7, 18/10)
010
N
Y
N
Y
N
Y
Engine start (pin X2 18/14)
020
Engine start (AUF)
030
N
Y
N
Y
Engine start (ANH)
040
Engine start until engine runs
050
N
Y
060
Input conditions checked once
Neutral position
070
OR
PTO 1 not engaged
130
Starter lock-out not activated (pin X2 18/9, 18/12)
100
PTO 2 not engaged
140
PTO 3 not engaged
150
N
Y
N
Y
N
Y
Starter lock-out not activated (AUF)
110
Starter lock-out not activated (ANH)
120
Parking brake (FCAN)
080
Parking brake (pin X4 18/5, 18/8)
090
OR
Output
N
Y
N
Y
N
Y
Engine start (FCAN)
Output of engine start (FCAN)
500
N
Y
Clutch initialization (EAS)
520
Clutch open
510
AND
Output
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
Clutch initialization (pin X4 18/12)
540
1.0
Delay time until clutch initialization
550
N
Y
Clutch pedal lock-out (pin X4 18/11)
530
AND
Key:
ANH = Trailer electronics
ANHCAN bus = Trailer CAN
AUF = Body electronics
AUFCAN bus = Body CAN
EAS = Electronic drive control
FCAN bus = Vehicle CAN
PTO = Power take-off
PSM = Parameterizable special module
s = Seconds
Equation 100: Engine start - Input conditions
Para-meter No. | Parameter | Connection to PSM | Basic Parameter | Remarks |
010 | Engine start | Pin X2 18/7, Pin X2 18/10 | YES | |
020 | Engine start | Pin X2 18/14 | NO | |
030 | Engine start (AUF) | AUFCAN bus | NO | |
040 | Engine start (ANH) | ANHCAN bus | NO | |
050 | Engine start until engine runs | Internal PSM | NO | |
060 | Single test of input conditions | Internal PSM | NO | |
070 | Neutral position | FCAN bus | YES | |
080 | Parking brake | FCAN bus | YES | |
090 | Parking brake | Pin X4 18/5, Pin X4 18/8 | NO | |
100 | Starter lock-out not activated | Pin X2 18/9, Pin X2 18/12 | NO | |
110 | Starter lock-out not activated (AUF) | AUFCAN bus | NO | |
120 | Starter lock-out not activated (ANH) | ANHCAN bus | NO | |
130 | PTO 1 not engaged | FCAN bus | NO | |
140 | PTO 2 not engaged | FCAN bus | NO | |
150 | PTO 3 not engaged | FCAN bus | NO |
Equation 100: Engine start - Output conditions
Para-meter No. | Parameter | Connection to PSM | Basic parameters | Remarks |
500 | Output of engine start | FCAN bus | YES | |
510 | Clutch open | FCAN bus | NO | |
520 | Clutch actuation (EAS) | FCAN bus | NO | |
530 | Clutch pedal lock-out | Pin X4 18/11 | NO | |
540 | Clutch actuation | Pin X4 18/12 | NO | |
550 | Delay time until clutch actuation | Internal PSM | 1.0 | Value range: 0...25 s |
Explanations regarding equation 100: Engine start | |||
| Wiring diagram of parameterizable special module (PSM) | Models 930, 932, 933, 934 | |
Models 375.3/4, 944, 950, 952, 953, 954 | |||
Model Series 957 | |||
Models 375.1, 970, 972, 974, 975, 976 wiring diagram I | |||
Models 375.1, 970, 972, 974, 975, 976 wiring diagram II |