Service Information: Removal/installation of propeller shaft

SI41.10-S-0006A

19.12.2018

Model	447
Model	448
Model	470, 471
Model	636
Model	639, 906, 907
Model	900
Model	909

Due to recent events, we would like to notify you that the removal/installation of the propeller shaft may only be conducted with the aid of a second person. The propeller shaft must be in as straight a position as possible when it is being removed/installed, transported and stored. The propeller shaft intermediate bearing must be installed free of tension when installing the propeller shaft.

 Do not kink the propeller shaft.
Otherwise, there is a risk that damage may generate vibrations or humming noise in the passenger compartment.

Remove/install propeller shaft	Model 900, 906	AR41.10-D-0050H
	Model 907	AR41.10-D-0050TS
	Model 909	AR41.10-D-0050R
	Model 636 Model 639 except code MA0 (E-CELL 60 kW)	AR41.10-S-0050S
	Model 447 with engine 274, 651 Model 448 with engine 274	AR41.10-S-0050E
	Model 470 with engine 200 Model 470, 471 with engine 699 except code ZG3 (Engageable all-wheel drive with gear reduction)	AR41.10-S-0050P
	Model 470, 471 with engine 642 Model 470, 471 with engine 699 with code ZG3 (Engageable all-wheel drive with gear reduction)	AR41.10-S-0050PU

เอกสารที่อ้างถึง