AR43.30-W-0023MP | Check temperature sensors | 13.9.05 |
MODEL 375, 930, 932, 933, 934, 944, 950, 952, 953, 954 with CODE (BA9) Voith secondary retarder R 115
W43.30-1219-05
1 Heating plate
2 Temperature measuring device
3 Measured value sensor
4 Multimeter
5 Electrical connection set
6 Temperature sensor
W43.30-1149-11
Diagram
Resistance value (ohm value) depending on temperature
| Remove | ||
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
1.1 | Remove oil temperature sensor | Model 375.4, 944, 950, 952, 953, 954 with Voith secondary retarder R 115 code BA9 | |
1.2 | Remove retarder oil temperature sensor | Model 930, 932, 933, 934 with | |
2.1 | Remove coolant temperature sensor | Model 375.4, 944, 950, 952, 953, 954 with Voith secondary retarder R 115 code BA9 | |
2.2 | Remove coolant temperature sensor | Model 930, 932, 933, 934 with | |
| Check | ||
3 | Suspend measured value sensor (3) of the temperature measuring device (2) in a vessel filled with water | | |
| |||
4 | Suspend the temperature sensor (6) on a wire in the vessel filled with water | ||
5 | Using the electrical connection kit (5) connect multimeter (4) to the temperature sensor (6) | Adjust multimeter (4) to Ohm measurement. | |
| |||
6 | Heat up water with the hot plate (1) | | |
7 | Check Ohm value of the temperature sensor (6) depending on temperature | Read off the water temperature on the temperature measuring device (2) and the Ohm value on the multimeter (4). The assignment of these two values must correspond to the characteristic in the diagram. If this is not the case, the temperature sensor (6) must be replaced. | |
| Install | ||
8.1 | Install oil temperature sensor | Model 375.4, 944, 950, 952, 953, 954 with Voith secondary retarder R 115 code BA9 | |
8.2 | Install retarder oil temperature sensor | Model 930, 932, 933, 934 with | |
9.1 | Install coolant temperature sensor | Model 375.4, 944, 950, 952, 953, 954 with Voith secondary retarder R 115 code BA9 | |
9.2 | Install coolant temperature sensor | Model 930, 932, 933, 934 with |
Electrical connection kit
220 589 00 99 00
Commercially available tools