Remove/install retarder oil temperature sensor

AR43.30-W-0020MP

Remove/install retarder oil temperature sensor

24.9.02

 

Remove/Install

 Danger!

Risk of injury due to touching the hot retarder surface or being scalded with hot retarder surface oil. Risk of injury to skin or eyes due to retarder oil spraying out under high pressure

Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder surface

AS43.30-Z-0001-01A

1

Engine control/permanent brake operating lever on position "0" and switch off ignition

2

Remove step

On semitrailer/tractor combinations.

3

Release cable attachments

 Installation: Install new tie straps.

4

Release and unplug Voith retarder (X97) connector

5

Detach Voith retarder connector (X97) from bracket

6

Remove retarder oil temperature sensor pin from the Voith retarder connector (X97)



*950589009900

7

Unscrew retarder oil temperature sensor (B66) and remove sealing ring (1)

 Installation: Replace sealing ring.



*BA43.30-N-1012-01A

8

Install in the reverse order

Number

Designation

Model
930, 932, 933, 934,
950, 952, 953, 954
with (code BA9)
Voith secondary retarder R 115

BA43.30-N-1012-01A

Oil temperature sensor to retarder housing

Nm

28