Vehicles with code CB0 (Integral rear end) |
1 | Test connection for service brake on rear axle |
2 | Test connection for service brake on front axle |
W42.60-1206-11
Vehicles with code CB0 (Integral rear end) |
3 | Test connection for trailer control |
6.17 | Electronic Air Processing Unit (EAPU) |
W42.60-1211-11
Vehicles without code CB0 (Integral rear end) |
2 | Test connection for service brake on front axle |
W42.60-1209-11
Vehicles without code CB0 (Integral rear end) |
1 | Test connection for service brake on rear axle |
3 | Test connection for trailer control |
6.17 | Electronic Air Processing Unit (EAPU) |
W42.60-1210-11
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Check | ||
1 | Connect test kit | Required test connections: | |
Test kit | |||
2 | Lower operating pressure in service brake circuit on rear axle at test kit to approx. 9.0 bar | ||
3 | Start engine and completely inflate air brake system with idle speed | ||
4 | Switch off ignition | ||
5 | Read off operating pressures on test kit | Operating pressure, circuit for service brake on RA and FA | |
Operating pressure, circuit for trailer control and parking brake | |||
If the required specified values are not reached: | |||
| |||
Replace the Electronic Air-Processing Unit (EAPU) (6.17). | |||
6 | Disconnect test kit |
360 589 00 21 00
Test kit