D26.45-1025-08
1 | Hydraulic line | 3 | Bolts | |
2 | Electrical connector | 4 | Power take-off slave cylinder |
5 | Seal |
D26.45-1026-01
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on externally invisible brake fluid loss | ||
Topical note | Brake fluid notes | ||
| Remove/install | ||
1 | Drain fluid from transmission. | ||
| Manual transmission - Oil change | ||
2 | Release hydraulic line (1) at power take-off slave cylinder (4). | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
| |||
Hydraulic line to power take-off slave cylinder | |||
Box wrench socket | |||
3 | Disconnect electrical connection (2). | ||
4 | Remove screw/bolts (3). | Bolt, power take-off slave cylinder to transmission | |
5 | Remove power take-off slave cylinder (4). | To do so, remove hydraulic line (1) from power take-off slave cylinder (4). Collect escaping brake fluid and any residual quantities of transmission oil. Seal openings with suitable stop plug. | |
Commercially available devices/tools | |||
Record plug | |||
6 | Remove seal (5). | Installation: Install new seal (5). | |
| Clean | ||
7 | Clean sealing surface on power take-off housing. | Assembly cleaner | |
8 | Clean sealing surface on power take-off slave cylinder (4). | If the power take-off slave cylinder (4) is reused. | |
Assembly cleaner | |||
9 | Install in the reverse order. | ||
10 | Bleed power take-off. |
Power take-off |
Number | Designation | Transmission 711.680 in model 906, 907 with code N05 (Power take-off countershaft (2c) without flange) | Transmission 711.685 | |
BA26.45-N-1013-01A | Bolt, power take-off slave cylinder to transmission | Nm | 28 | 28 |
Power take-off |
Number | Designation | Transmission 711.680 in model 906, 907 with code N05 (Power take-off countershaft (2c) without flange) | Transmission 711.685 | |
BA26.45-N-1014-01A | Hydraulic line to power take-off slave cylinder | Nm | 14 | 14 |
000 589 77 03 00
Box wrench socket
129 589 00 91 00
Record plug