D26.00-1105-09
1 | Drain screw | 3 | Bracket | 5 | Check screw | ||
2 | Shift cable | 4 | Filling screw |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Draining | |||
1 | Remove lower engine compartment lining. | ||
| |||
2 | Clean area around drain screw (1). | ||
3 | Remove drain screw (1) and completely drain off transmission oil. | To do so, place a suitable receptacle under drain screw (1). | |
4 | Clean the magnet of the drain screw (1). | ||
5 | Screw in drain screw (1). | Drain screw to transmission housing | |
Filling | |||
6 | Unhook shift cable (2) from holder (3) and place to one side. | ||
7 | Clean area around filling screw (4). | ||
8 | Remove filling screw (4). | ||
9 | Fill transmission with oil. | Gear oil | |
10 | Screw in filling screw (4). | Filling screw to transmission housing | |
11 | Hook shift cable (2) into holder (3). | ||
12 | Clean area around check screw (5). | ||
13 | Remove check screw (5). | ||
14 | Check transmission oil level using tool to be self-produced. | ||
| Measuring tool for transmission oil level | ||
The transmission oil level must lie 10 mm below the lower edge of the bore. | |||
15 | Screw in check screw (5). | Inspection plug to transmission housing | |
16 | Install lower engine compartment paneling. | ||
| |||
Mount lower engine compartment paneling only after completion of all maintenance operations. | |||
17 | Confirm conducted operations in maintenance booklet or in Digital Service Booklet (DSB). |