Remove/install gear module

AR26.20-W-1004A

Remove/install gear module

12.4.10

 

Remove/install

 Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

1

Tilt cab



Notes on tilting the cab

AH60.80-N-0003-01A

2

Unplug electrical connector (2) at gear module (A92).

3

Unscrew clamp of left coolant line from retarder on transmission and press down coolant line

 Only vehicles with code (BA9) Voith secondary retarder R 115 or with code (BA1) Performance-optimized Voith retarder.

4

Detach compressed-air line (3) from gear module (A92).

 With compressed air connector system "VOSS 230".

AR42.10-W-0900A



Notes on compressed air connection systems

AH00.18-N-0001-01A

5

Detach gear module (A92).

 Installation: Coat sealing surface of gear module (A92) with sealing compound.

*BR00.45-Z-1015-01A

 Transmission 715.500/507/510/513/520/
540

*BA26.20-N-1001-04A

 Transmission 715.350/370/380/515/525

*BA26.20-N-1001-04KL

6

Install in the reverse order

7

Teach in gear control (GS) control unit

AR54.21-W-0009A

Number

Designation

Transmission
715.500/507/510/
513/520/540
with code GS7

BA26.20-N-1001-04A

Bolt, gear module to transmission

Nm

25

Number

Designation

Transmission
715.350

Transmissions 715.370/380

BA26.20-N-1001-04KL

Bolt, gear module to transmission

Nm

25

25

Number

Designation

Transmission 715.515/525

BA26.20-N-1001-04KL

Bolt, gear module to transmission

Nm

25

Number

Designation

Order number

BR00.45-Z-1015-01A

Loctite 5203 sealant

A 002 989 71 20 10