AR20.30-T-4950B | Remove/install expansion reservoir | 10.5.00 |
ENGINE 441.980 in MODEL 613.355 /364 /365
ENGINE 402.970, 446.938 in MODEL 613.455 /485
ENGINE 457.944 in MODEL 613.358 /388
T20.30-0012-06
Illustration A on model 613.364/ 365
Illustration B on model 613.355/ 358/ 388/ 455/ 485
1 Expansion reservoir
2 Threaded connection
3 Tensioning strap
| Removing, installing | ||
1 | Open rear lid | ||
Danger! | Risk of scalding from hot coolant splashing out | Do not open the cap of the expansion reservoir or radiator unless the coolant temperature is below 90 °C. Carefully slacken cap as far as the first detent or one turn. Wear protective clothing. | |
2 | Drain coolant | ||
| Notes on coolant | All engines | |
| Drain coolant, pour in | Only engine 402.970, 441.980, 446.938 | |
3 | Detach hose and pipe connections at expansion reservoir (1) | ||
4 | Slacken threaded connections (2) of attachment of reservoir | On model 613.355/ 358/ 388/ 455/ 485 the expansion reservoir is attached by two tensioning straps (3). The tensioning straps are only inserted on the rear and can be removed. | |
5 | Remove expansion reservoir (1) | ||
6 | Install in the reverse order |