S07.16-4632-09
Shown on engine 699.301 |
1 | Rail | 3 | Electrical connector | 6 | Bracket | ||
2 | Screw | 5 | High pressure pipe |
S07.16-A050-09
Shown on engine 699.305 |
1 | Rail | 5 | High pressure pipe | 7 | Electrical connector | ||
2 | Screw | 6 | Bracket | 8 | Fuel line | ||
3 | Electrical connector |
Danger | Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure | Keep all ignition sources out of hazard area. | |
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove high-pressure lines of the fuel injectors. | ||
2 | Remove high-pressure line (5). | ||
3 | Remove bracket (6) from rail (1). | ||
4 | Disconnect electrical connector (3). | ||
5 | Detach electrical connector (7). | Model 470 with engine 699.304/305 | |
6 | Remove fuel line (8). | Model 470 with engine 699.304/305 | |
Seal connections. Collect escaping fuel. | |||
Record plug | |||
7 | Remove rail (1). | To do this, remove screws (2). | |
Bolt, rail to cylinder head cover | |||
8 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Check for leaktightness when engine is running. | Visual inspection only. |
129 589 00 91 00
Record plug