S07.02-4522-09
1 | Fuel system high pressure pump | 4 | Bolts | 7 | Fuel lines | ||
2 | Bolts | 5 | Bolts | 8 | Electrical connector | ||
3 | Cover | 6 | Lines |
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Danger | Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure | Keep all ignition sources out of hazard area. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Notes about Common-Rail components | |||
| Remove/install | ||
1 | Remove engine | ||
2 | Remove lines (6) from cover (3) | To do this, remove the screw/bolts (5). | |
M6 | |||
3 | Detach cover (3) | For this purpose, remove bolts (4). | |
Bolt, cover for fuel high-pressure pump to bracket | |||
4 | Remove high-pressure line to rail | ||
5 | Remove fuel lines (7) from fuel high-pressure pump (1) | | |
Record plug | |||
6 | Disconnect electrical connector (8) | ||
7 | Remove screw/bolts (2) | Screw/bolt, high-pressure fuel pump to cylinder head | |
8 | Remove fuel system high pressure pump (1) | | |
Installation: Replace seal. | |||
9 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Check for leak tightness with engine running | Visual inspection only. |
129 589 00 91 00
Record plug