Additional testing during an engine repair on the crankshaft, on main bearing and connecting rod bearing

AR03.20-W-0002J

Additional testing during an engine repair on the crankshaft, on main bearing and connecting rod bearing

06.08.2014

ENGINE

900.9 in MODEL 375.1, 970, 972, 975, 976

ENGINE

902.9 in MODEL 375.1, 970, 972, 974, 975, 976

ENGINE

902.9 in MODEL 375.3, 950.5/6, 952.5/6, 953.6, 954.5

ENGINE

902.9 in MODEL 957

without CODE MS8 (Natural gas engine)

ENGINE

924.9 in MODEL 958.0, 970, 972, 974, 975, 976

ENGINE

925.9 in MODEL 970, 972, 974

ENGINE

926.9 in MODEL 950.5/6, 952.5/6, 953.6, 954.5, 957, 958.2

ENGINE

926.9 in MODEL 958.0



Check

1

Remove oil filter element and check slats of oil filter element from outside for metal abrasion and swollen condition

Only in case of extreme wear or damage to the engine components.



Model 375, 950, 952, 953, 954, 957, 970, 972, 974, 975, 976

AP18.00-W-0101B

 Model 958
No instructions were created yet for these variants.

2

Replace oil-water heat exchanger

Only if there is metal abrasion on the oil filter element lamella or in the engine oil circuit.

Engine 900.9, 924.9

AR18.30-W-6840JA

Engine 902.9, 925.9, 926.9 except in model 957

AR18.30-W-6840J

Engines 902.9, 926.9 in model 957

AR18.30-W-6840JB

3

Remove oil pump, disassemble and check for wear and damage by means of a visual inspection

Only if extreme metal abrasion was found at oil filter element.

MODELS 375, 950, 952, 953, 954, 958, 970, 972, 974, 975, 976

AR18.10-W-6020J

Model 957

AR18.10-W-6020JB

4

Fill engine oil circuit

Only if the engine was repaired due to crankcase damage.

AR18.00-W-1600J

5

Replace engine oil and oil filter element

Only in case of metal abrasion or swollen oil filter element (coolant in engine oil circuit).



Model 375, 950, 952, 953, 954, 957, 970, 972, 974, 975, 976

AP18.00-W-0101B

 Model 958
No instructions were created yet for these variants.