N47.20-2072-01
Engine 457.9 | ||||
1 | Threaded cap | |||
2 | Sealing ring | |||
3 | Filter element | |||
Engine 541.9, 542.9 | ||||
1 | Threaded cap | |||
2 | Sealing ring | |||
3 | Filter element | |||
N07.57-0207-01
Danger ! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
| Remove | ||
1 | Open lid on fuel tank | To release overpressure in fuel tank. | |
2 | Unscrew screw cap (1) from fuel filter housing | Remove screw cap (1) with filter element (3) only after the fuel has drained out of the fuel filter housing. | |
3 | Remove threaded cap (1) with filter element (3) and unclip filter element (3) by pressing at side | | |
| Install | ||
4 | Lightly grease new sealing ring (2) | ||
5 | Insert new filter element (3) into the screw cap (1) | ||
6 | Screw on screw cap (1) with filter element (3) and tighten | Engine 457.9Cover to fuel filter | |
Engine 541.9, 542.9Cap on fuel filter housing | |||
7 | Close cap on fuel tank | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Start the engine and bleed the fuel system | Run the engine for approx. 1 minute. The fuel system is ventilated automatically. | |
If the engine stops or does not start | |||
| |||
Bleed fuel system | |||
| |||
9 | Check leaktightness of fuel filter housing with engine running |