Shown on oil reservoir in model 638 |
1 | Cap |
N46.00-2217-01
N46.00-2216-01
Shown on oil reservoir in model 636, 639 |
1 | Cap |
S46.00-4502-01
Shown on oil reservoir with oil dipstick in model 690.6, 900, 901, 902, 903, 904, 905, 906 |
1 | Cap |
N46.00-2180-01
Shown on oil reservoir without oil dipstick in model 690.6, 901, 902, 903, 904, 905 |
N46.00-2179-01
Shown on oil reservoir in model 667, 668, 670 |
2 | Oil dipstick |
N46.00-0276-01
| Check | ||
1.1 | Remove oil reservoir cap (1) | Only on oil reservoir without separate oil dipstick (2) | |
Check cap seal for damage and replace if necessary. | |||
1.2 | Remove oil dipstick (2). | Only on oil reservoir with separate oil dipstick (2) | |
2.1 | Check oil level | Only on model 690.6, 901, 902, 903, 904, 905 without oil dipstick (2) on cap (1) and without separate oil dipstick (2) | |
The oil reservoir is filled correctly when the oil is between the "Min." and "Max." mark (arrow) at approx. 20 °C. | |||
2.2 | Check oil level | Only on oil reservoir with oil dipstick (2) on cap (1) and with separate oil dipstick (2) | |
Clean oil dipstick (2) with a lint free rag, insert fully, pull out again and read off oil level. | |||
The oil reservoir is filled correctly when the oil is between the "Min." and "Max." mark corresponding to oil temperature. | |||
3 | Adjust to correct level | ||
| Automatic transmission fluids (ATF, type A, suffix A) | MODEL 636, 638, 639 | |
| Steering gear oils (ATF) | MODEL 636, 638, 639 | |
| Automatic transmission fluids (ATF, Sheet 236.6) | MODEL 667, 668, 670 with ENGINE 602.9 | |
| Automatic transmission fluids (ATF, Sheet 236.7) | MODEL 667, 668, 670 with ENGINE 602.9 | |
4.1 | Mount and tighten cap (1) | Only on oil reservoir without separate oil dipstick (2) | |
4.2 | Insert oil dipstick (2). | Only on oil reservoir with separate oil dipstick (2) |