1 | Gauge checking bore |
2 | Gauge checking bore |
3 | Ring shaped part part circle bead or full circle bead |
P60.10-2188-04
Starting with the model 164 as of vehicle identification end no. 2343472 a new gauge checking embossing (1) replaces the previous gauge checking bore (2).
Application:
In the event of repair, i.e. during reforming work or before welding in new parts within the bodyshell structure, the vehicle is aligned in the usual manner using the suitable straightening tool set.
The straightening tool for tolerance checking with the new plug gauge (tip angle 90°) ensures that the vehicle is fixed in position parallel with the straightening bench.
In the case of all new body structures in steel construction in the floor area centrally between the front the front and rear axle this measuring point in future will be marked with a center point embossing plug gauge centering.
In addition a ring-shaped part circle bead or full circle bead (3) is provided for locating the center point embossing of the floor area.
Currently affected by this are model 164 and model 212.