1 | Coolant pipe |
2 | Hose clamps |
3 | Coolant line |
4 | Coolant hose |
5 | Connection fitting |
N58.40-2028-05
We would like to notify you that the coolant lines (3) or coolant hoses (4) on the coolant pipes (1) or connection fittings (5) can work their way loose, and in the worst case, they can be completely disconnected. The reasons for this are pre-tension losses and the settling properties of hose clamps (2), coolant hoses (4) or coolant lines (3).
Therefore, the hose clamps (2) must be tightened to the specified torque .
Suitable special tools for tightening torque:
Torque wrench (4 Nm 20 Nm)
Torque driver (2 Nm - 6 Nm)
The existing work instructions on the topic of flushing the engine cooling system are being adapted accordingly.
Complaints and queries concerning the coolant circuit flushing unit 963 589 05 91 00
Complaints and queries concerning the coolant circuit flushing unit 963 589 05 91 00 can be submitted via the XSF event category "Workshop equipment". You can access this either via the EPC and the "Workshop equipment" mode or directly through the XSF application.
Flush engine cooling system | Model WDF963.### ## up to 984696 with engine 470, 471, 473 |
963 589 05 91 00
Coolant circuit flushing unit
001 589 80 21 00
Torque screwdriver
001 589 75 21 00
Torque wrench