D20.20-0002-06
1 Radiator
2 Air intake hose
3 Coolant hose
4 Boost air hose
5 Coolant hose
6 Coolant hose
7 Oil pipes
8 Rubber glands
9 Cooling loop
D20.20-0003-09
| Removing, installing | ||
1 | Disconnect ground cable at battery. | ||
Danger! | Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant. | Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks. Wear protective gloves, protective clothes, and eye protection. | |
2 | Drain coolant | ||
3 | Remove center section of front end | ||
4 | Detach coolant hoses (5, 6) at the coolant outlet connection | ||
5 | Pinch off oil pipes (7), slacken at the cooling loop (9) and detach | | |
6 | Remove air intake hose (2) | ||
7 | Detach coolant hose (3) at the engine | ||
8 | Detach boost air hose (4) | ||
9 | Take out radiator (1) | ||
10 | Remove rubber glands (8) | ||
11 | Install in the reverse order |
000 589 40 37 00
Clamp