ar1440w2008c

Remove/install pressure reservoir at pump module of exhaust aftertreatment system

Vrsta ar · tema 14.40 · različica 0401 · 2011-05-11

Velja za: ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS4) BlueTec 4 ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS5) BlueTec 5 ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4 ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5 ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4 ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5 ENGINES 925.9 in MODEL 970, 972,

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 1 Motor › 14 Izpušnih zbiralnik, motorna zavora, naprava za čiščenje izpušnih plinov › 14.40 Sistem za čiščenje izpušnih plinov, AdBlue — Serija 375 (modeli 1**, 3**) · Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 949 · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 957 · Serija 958 (modeli 0**, 2**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

EinPAS 15 motor › 15.40 izpušna naprava/čiščenje izpušnih plinov › 15.40.51 črpalka/dozirna naprava/šoba — Serija 375 (modeli 1**, 3**) · Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 949 · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 957 · Serija 958 (modeli 0**, 2**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

Velja tudi za motorje/menjalnike: 924 9**, 925 9**, 926 9**

AR14.40-W-2008C

Remove/install pressure reservoir at pump module of exhaust aftertreatment system

2.5.11

ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4

ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 925.9 in MODEL 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5

ENGINES 926.9 in MODEL 958.0 with CODE (MS4) BlueTec 4

ENGINES 926.9 in MODEL 958.0 with CODE (MS5) BlueTec 5

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS4) BlueTec 4

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS5) BlueTec 5

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS4) BlueTec 4

ENGINES 926.9 in MODEL 949, 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS5) BlueTec 5

Remove/install pressure reservoir at pump module of exhaust aftertreatment system

W14.40-1019-08

Shown on model 950.5

1 Pump module

2 Coolant lines

3 Pressure reservoir housing

6 Valve

7 Housing cover

4 Pressure reservoir

5 O-ring

Modification notes

24.3.11

"Pressure reservoir for pump module changed" added.

Operation step 1

BT14.40-W-0003-01A

"Fill pressure reservoir (4) with compressed air" added.

Operation step 6

AR14.40-W-2051A

Removing

Danger!

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Only pour AdBlue into suitable containers. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

1

Detach protective cap on valve (6)

If a valve cap and protective cap in the previous design are still installed at the pressure reservoir (4), a valve cap in the new design must be installed. The new valve cap has an inside seal and is installed without protective cap.

Pressure reservoir for pump module changed

BT14.40-W-0003-01A

2

Drain pressure reservoir (4)

Press valve (6) until pressure reservoir (4) has been completely drained.

3

Remove housing cover (7) with pressure reservoir (4)

Install

4

Clean housing cover (7) with pressure reservoir (4) and pressure reservoir housing (3) and check for damage

Replace housing cover (7) with pressure reservoir (4) if necessary.

5

Install housing cover (7) with pressure reservoir (4)

Clean contact surfaces for O ring (5) using clean rags and water.

Thinly coat O-ring (5) with lubricant before assembly.

*BR00.45-Z-1019-06A

Be sure to use the prescribed lubricant and make sure that the lubricant is used extremely sparingly, as otherwise damage to the exhaust aftertreatment system may occur.

*BA14.40-N-1011-02C

6

Inflate pressure reservoir (4) with compressed air

AR14.40-W-2051A

7

Check housing cover (7) for signs of leaks

Visual inspection.

Exhaust aftertreatment

Number

Designation

Engine
900.9, 902.9, 924.9, 925.9, 926.9 with code MS4 or code MS5

BA14.40-N-1011-02C

Pressure reservoir housing cover on pump module

Nm

4

Repair materials

Number

Designation

Order number

BR00.45-Z-1019-06A

ABS sensor grease

A 000 989 62 51 10

Povezani dokumenti