ar0702d1030a

Remove/install predelivery pump

Тип ar · тема 07.02 · версия 0107 · 2002-07-22

Применимость: ENGINE 611.981 /987 in MODELS 901.6, 902.6, 903.6, 904.6 ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6 ENGINE 611.983 in MODEL 690.6

Нет на языке «ru»; показано на языке Английский.

Расположение

Функциональная группа 1 Двигатель › 07 Смесеобразование › 07.02 Распределительный / рядный ТНВД, ТНВД цилиндра, ТНВД — Серия 611 (модели 981, 983, 987) · Серия 690 (модели 6**) · Серия 901 (модели 6**) · Серия 902 (модели 6**) · Серия 903 (модели 6**) · Серия 904 (модели 6**) · Серия 905 (модели 6**)

EinPAS 15 Двигатель › 15.45 Система управления двигателем › 15.45.51 ТНВД цилиндра / механизм изменения угла опережения впрыска — Серия 611 (модели 981, 983, 987) · Серия 690 (модели 6**) · Серия 901 (модели 6**) · Серия 902 (модели 6**) · Серия 903 (модели 6**) · Серия 904 (модели 6**) · Серия 905 (модели 6**)

Также относится к двигателям/коробкам передач: 612 981

AR07.02-D-1030A

Remove/install predelivery pump

16.4.99

ENGINE 611.981 /987 in MODELS 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINE 611.983 in MODEL 690.6

Remove/install predelivery pump

D07.02-1102-05

1 Predelivery pump

2 Fuel feed line

3 Fuel outlet line

4 Sealing ring

5 Torx screw

6 Driver

Remove, Install

Danger!

Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.

Fire, sparks, open flames or smoking forbidden.
Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove vacuum pump

AR43.05-D-1320E

2

Detach fuel lines (2, 3) at the predelivery pump (1)

Cover over poly V-belt. Fuel which flows out may cause damage.

Pay attention to use of locking arm. Refer to:

Disconnect, connect fuel lines at engine.

AR47.25-P-1000-01A

3

Unscrew torx bolts (5)

*BA07.16-P-1010-01A

4

Detach predelivery pump (1)

The predelivery pump must not be opened.

Installation:Replace seal (4), clean sealing surface. Ensure that the driver of the predelivery pump meshes into the driver (6) at the inlet camshaft.

5

Install in the reverse order

6

Bleed low-pressure fuel circuit

AR07.16-D-0100A

Danger!

Risk of accident as vehicle may start off by itself with the engine running. Risk of injury as working around the engine during start-up or while running may result in contusions and burns

Secure vehicle to prevent it from moving off by itself.
Wear closed and close-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

7

Check tightness of fuel system

Run engine, switch off and check for leaks.

Common rail diesel injection (CDI)

Number

Designation

Engine 611.981/
987

Engine 612.981

BA07.16-P-1010-01A

Bolt, predelivery pump to top cover of cylinder head

NM

9

9

Common rail diesel injection (CDI)

Number

Designation

Engine 611.983

BA07.16-P-1010-01A

Bolt, predelivery pump to top cover of cylinder head

NM

9

Связанные документы