Remove/install clock spring contact

AR46.10-P-0200A

13.1.10

MODEL 129.### ## as of 079795,
140.### ## as of 123447,
202,
210 up to 31.5.99

P46.10-0214-01

P46.10-0216-01

P46.10-0212-01

P46.20-0240-01

P46.10-0215-01

P46.10-0330-01

 	Remove/install
1	Remove steering wheel	 Front wheels in straight-ahead position, steering wheel lock engaged.	AR46.10-P-0100B
2	Remove cover below dashboard	Model 129.	ra68001290150x
		Model 140.	ra68001400150x
		Model 202.	AR68.10-P-1500E
		Model 210.	AR68.10-P-1500F
3	Detach connector of clock spring contact/AB (A45x1), create access to line
4	Detach connector of clock spring contact/relay (A45x2), create access to line
5	Unscrew fastening bolts (32h) only sufficiently to remove the clock spring contact (A45)	 The fastening bolts also act as protection against twisting and as an assembly aid.
6	Carefully remove clock spring contact (A45) from steering column tube	 Installation: Slide on clock spring contact (A45) as far as the end stop, the cutout must match with the lock tab (arrows).
		 If the clock spring contact is twisted, e.g. when the steering coupling is removed: 
		Adjust center position of clock spring contact.	AR46.10-P-0200-01A
7	Pay attention to the correct seat of the retaining ring (70h)
	Checking
8.1	Check distance dimension (b) between the retaining ring (70h) and bracket (85)	Vehicles with electrically adjustable steering column.
		 Only required if there are complaints of grinding noises: 
		Model 129, 140, 210.	AR46.10-P-0600-01B
			*BE46.10-P-1003-03A
		 Model 129, 140.	*BA46.10-P-1006-03A
		 Model 210.	*BA46.10-P-1015-03D
9	Check the spiral contact coil (A45) for damage	Visual inspection.
		 The upper (32f) and lower section (32g) of the clock spring contacts are clipped together and can only be separated by alot of force or faulty assembly. If this is the case, wind up the clock spring contact carefully and assemble cautiously, so that the scrolls (32e) do not pinch or kink.
		 Do not use oil or grease!
10	Install in the reverse order

Test values for steering column tube

Number	Designation		Model 129	Model 140	Model 210


BE46.10-P-1003-03A	Dimension "b" on upper bracket on steering column tube	mm	30+0,5	30+0,5	30+0,5
		See picture	AR46.10-P-0600-01B	AR46.10-P-0600-01B	AR46.10-P-0600-01B

 Jacket tube

Number	Designation		Model 129	Model 140


BA46.10-P-1006-03A	Clamp screw, upper bracket to steering column tube	Nm	5	5

 Jacket tube

Number	Designation		Model 210


BA46.10-P-1015-03D	Clamp screw, upper bracket to steering column tube	Nm	5

Documente menționate