ME-SFI idle speed control/electronic accelerator - Testing electrical system · ad0761p6002c · Mercedes-Benz WIS

AD07.61-P-6002C

ME-SFI idle speed control/electronic accelerator - Testing electrical system

25.11.2019

Engine	104.941/943/944/991/994 as of 8/1/96
Engine	104.995
	as of model year 1997
	with code 494 (US version)
	with code 498 (Japanese version)
	with code 807 (Model year 1997)
	with code 808 (Model year 1998)

 Danger	Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.	Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.	AS00.00-Z-0004-01A
 Danger	Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
 Danger	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.	No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
Topical note	Notes on avoiding damage to ignition system		AH15.10-P-0002-01D
	Connecting and using test equipment		AD00.00-P-1000AZ
	Connecting hand-held tester (HHT), reading fault memory		AD00.00-P-2000-03A
	Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge		AD07.61-P-2000C
	Socket box connection diagram - ME-SFI - testing of electrical system	Plug with red identification is currently not yet required, as still no function available in ME-SFI [ME] control unit	AD07.61-P-2000-01A
	When removing the couplings at the ME-SFI [ME] control unit, first remove the center coupling; during attachment, the center coupling D is the last to be attached.
	Measuring equipment/ test connection column:
	The numbers entered in brackets, e.g. in  1.0 (2A) mean:
	A = coupling A in wiring diagram
	2 = socket 2 in wiring diagram
	Ignition OFF
	Check


1	ME-SFI [ME] electronic accelerator/idle speed control electrics check pedal value sensor signal 1		AD07.61-P-6002-08A
2	ME-SFI [ME] electronic accelerator/idle speed control electrics check pedal value sensor signal 2		AD07.61-P-6002-09A
3	ME-SFI [ME] electronic accelerator/idle speed control electrics check throttle valve actuator signal		AD07.61-P-6002-03B
4	ME-SFI [ME] electronic accelerator/idle speed control electrics check throttle valve actuator actuation		AD07.61-P-6002-04A
5	ME-SFI [ME] electronic accelerator/idle speed control electrics check P/N recognition	104.941 as of 1.8.96 with transmission 722.4/6	AD07.61-P-6002-05C
6	ME-SFI [ME] electronic accelerator/idle speed control electrics check clutch pedal switch	with manual transmission	AD07.61-P-6002-06A
7	ME-SFI [ME] electronic accelerator/idle speed control electrics check backup light switch	with manual transmission	AD07.61-P-6002-07A

Documente menționate

ad0000p1000az Conectaţi şi aplicaţi mijloacele de verificare
ad0000p200003a
ad0761p200001a Schemă racord casetă diagnosticare verificare echipament electric ME
ad0761p2000c
ad0761p2000c
ah1510p000201d Indicaţii pentru evitarea producerii de avarii la instalaţia de aprindere
as0000z000401a Pericol de moarte prin prinderea în componentele autovehicului aflate în rotaţie
as0000z003501a Pericol de moarte în cadrul lucrărilor la componentele şi sistemele cu U >= 30 V tensiune alternativă (CA) respectiv cu U >= 60 V tensiune continuă (CC)
as4700z000101a Pericol de explozie prin aprindere, pericol de intoxicare prin inhalare şi înghiţire de carburant cât şi pericol de rănire prin contactul pielii şi ochilor cu carburantul