AR91.29-P-1431SC | Remove/install backrest motor for front seat | 6.6.07 |
MODEL 216.3
Backrest angle adjustment motor
P91.29-2519-09
Shown on right front seat
1 Clamping plate
2 Axle
3 Cable tie
4 Electrical connector
M27/5 Left front backrest angle adjustment motor
M28/5 Right front backrest angle adjustment motor
5 Bearing bushing
6 Shaft
7 Pliers
8 Rag
| Remove/install | ||
1 | Remove seat-back lining from front seat backrest | ||
2 | Removing front seat backrest upholstery | ||
3 | Detach clamping plate (1) from axle (2) | Installation: Replace clamping plate (1). | |
4 | Remove cable tie (3) | ||
5 | Disconnect electrical connector (4) | Release electrical connector (4) carefully, risk of breakage to electrical connector plug (4). The plug is not available as a replacement part. | |
6 | Detach left front backrest angle adjustment motor (M27/5) or right front backrest angle adjustment motor (M28/5) from the shaft (6) and axle (2) | Observe bearing bushing (5). | |
Installation: Use suitable pair of pliers (7) to turn shaft (6) far enough until the left front backrest angle adjustment motor (M27/5) or the right front backrest angle adjustment motor (M28/5) can be slipped onto the axle (2). When doing so, protect the shaft (6) against damage using a rag (8). | |||
7 | Install in the reverse order | ||
8 | Normalize front seat | ||
| Connect STAR DIAGNOSIS and read out fault memory |
Powiązane dokumenty
- ad0000p200004a Podłączanie STAR DIAGNOSIS, odczytywanie pamięci usterek
- ad0000p200004a
- ar9110p1090sc
- ar9110p1910sc