P91.10-2975-07
Illustrated on right trim ring on right front seat
1 Head restraint
3 Trim ring
2 Washer
P91.10-2976-09
Illustrated on right front seat with code (401) Front comfort seats, incl. seat heating and seat ventilation
4 Hook
5 Seat cover
6 Electrical connector
(with code (401) Front deluxe seats, incl. seat heating and seat ventilation)
8 Padding
9 Heated seats electrical connector
7 Seat ventilation wiring harness
(with code (401) Front comfort seats, incl. seat heating and seat ventilation)
| Remove/install | ||
1 | Remove head restraint drive from left or right front seat | ||
2 | Remove front seat release | ||
3 | Remove front seat sidebag unit and place to one side with wiring harness connected | ||
4 | Slide a suitable mat (2) between cover (5) and left and right trim ring (3), then rotate left and right trim ring (3) by 45° using pliers and remove | If no mat (2) is used, cover (5) can be damaged with the pliers. | |
Installation: Check trim rings (3), replace if necessary. | |||
5 | Unhook left and right hook (4) from padding (8) on spring frame using a suitable tool | ||
6 | Unhook cover (5) from backrest frame (arrows) | Installation: Check seating of cover (5), adjust if necessary. | |
7 | Disconnect electrical connector for heated seats (9) | ||
8.1 | Disconnect electrical connector (6) | With code (401) Front deluxe seats, incl. seat heating and seat ventilation | |
9.1 | Disconnect electrical connector at dynamic seat control unit and disconnect pneumatic line for dynamic seat at connection piece | With code (432) Left and right dynamic multicontour seat | |
10 | Lift up padding (8) with cover (5) and guide seat belt through cover (5) and padding (8) | ||
11.1 | Guide seat ventilation wiring harness (7) through spring frame | With code (401) Front deluxe seats, incl. seat heating and seat ventilation | |
12.1 | Guide dynamic seat wiring harness and pneumatic line for dynamic seat through spring frame | With code (432) Left and right dynamic multicontour seat | |
13 | Remove padding (8) with cover (5) | ||
14 | Install in the reverse order |