P91.10-2986-06
Shown on left front seat
1 Seat-back lining
2 Seat adjustment mechanism
3 Hook
4 Elastic band
5 Cable tie
6 Bolts
| Removing | ||
1 | Move left or right front seat to the center of the longitudinal adjustment range and all the way up | ||
2 | Unhook elastic band (4) at bottom of seat adjustment mechanism (2) from hook (3) | ||
3 | Fold lower section of seat-back lining (1) upwards and remove bolts (6) | ||
4 | Pull seat-back lining (1) down and take off | ||
| Install | ||
5 | Feed cable tie (5) through third last hole in elastic band (4) and make a loop with a diameter of | ||
6 | Fit seat-back lining (1) onto front seat backrest | Ensure that seat-back lining (1) is correctly seated on front seat backrest. | |
7 | Tighten bolts (6) | ||
8 | Fold lower section of seat-back lining (1) downward | Ensure that lower section of seat-back lining (1) is correctly seated. | |
9 | Move front seat backrest into rearmost position | ||
10 | Feed through rubber band (4) at bottom of seat adjustment mechanism (2) and secure cable tie (5) in hook (3) |