Remove/install window frame lining between front window and middle window in side wall

AR68.30-D-0027TSR

Remove/install window frame lining between front window and middle window in side wall

12.02.2019

Model

907.6/7

Shown on model 907.7 on the left side of the vehicle with code IR6 (wheelbase 4,325 mm, overhang 1,615 mm) with code V21 (luxury interior trim), with code UD6 (passenger compartment seating, 4-seater bench 3rd row) and except code T19 (left sliding door) for removed passenger bench seats

1

Window frame paneling

6

Edge guard

2

Window frame paneling

7

Edge guard

3

Window frame paneling

8

Window frame paneling

4

Headliner

9

Window frame paneling

5

Side wall lining

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove window frame lining (2).

AR68.30-D-0021TSR

2

Remove window frame lining (3).

AR68.30-D-0022TSR

3

Release roof lining (4) at the retaining tabs (arrows) from the side wall in the area of the center window.

4

Release side wall trim (5) in the area of the window frame lining (1).

Model 907.6/7
with code IR6 (Wheelbase 4325 mm, overhang 1615 mm)
Model 907.6/7
with code IR7 (Wheelbase 4325 mm, overhang 2015 mm)

AR68.30-D-1211TSR

5

Release edge guards (6, 7) in the area of the window frame lining (1).

6

Lift window frame lining (1), pry off, and remove.

 Installation: Ensure that the window frame linings (8, 9) overlap the window frame lining (1).

 The window frame lining (1) is bonded to the side wall using tape.

 Long wedge

*115589035900

7

Remove masking tape residues from the side wall with a suitable tool.

Cleaner

*BR00.45-Z-1025-04A

8

Remove masking tape residues from the window frame lining (1) with a suitable tool.

When reusing the window frame lining (1).

Cleaner

*BR00.45-Z-1025-04A

9

Attach new adhesive tape strips to the window frame lining (1).

When reusing the window frame lining (1).


Ensure that the adhesive strips are positioned in the same way as the adhesive strips that were removed previously.
Otherwise adhesion problems may occur.

Double-sided tape with polyethylene foam support, Scotch-Mount 9528

*BR00.45-Z-1197-02A

10

Install in the reverse order

Repair materials

Number

Designation

Order number

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71

BR00.45-Z-1197-02A

Double-sided tape with polyethylene foam support, Scotch-Mount 9528

3MDeutschland GmbH
https://www.3m.com