Remove/install upper window frame lining for front window in side wall

AR68.30-D-0021TSR

Remove/install upper window frame lining for front window in side wall

12.02.2019

Model

907.6/7

Shown on model 907.7 on the left side of the vehicle with code IR4 (wheelbase 3,665 mm), with code V21 (luxury interior trim), with code EL9 (2-way front and rear speaker system) and except code T19 (left sliding door) for removed passenger bench seats

1

Window frame paneling

2

B-pillar paneling

3

Headliner

4

Edge guard

5

Window frame paneling

6

Window frame paneling

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Release corresponding B-pillar trim (2) in the top area.

Remove/install B-pillar trim (2) on the driver's side
Model 907.7

AR68.30-D-4707TS

Remove/install B-pillar trim (2) on the front passenger sideModel 907.7

AR68.30-D-4706TS

Remove/install B-pillar trim (2)Model 907.6

AR68.30-D-4705TS

2

Release roof lining (3) from the retaining tabs (arrows) from the side wall in the area of the front window.

 Long wedge

*115589035900

3

Release edge guard (4) in the area of the window frame lining (1).

4

Lift window frame lining (1), pry off, and remove.

 Installation: Ensure that the window frame lining (1) overlaps the window frame linings (5, 6) and is aligned centrally.

 The window frame lining (1) is bonded to the side wall using tape.

 Long wedge

*115589035900

5

Remove masking tape residues from the side wall with a suitable tool.

Cleaner

*BR00.45-Z-1025-04A

6

Remove masking tape residues from the window frame lining (1) with a suitable tool.

When reusing the window frame lining (1).

Cleaner

*BR00.45-Z-1025-04A

7

Attach new adhesive tape strips to the window frame lining (1).

When reusing the window frame lining (1).


Ensure that the adhesive strips are positioned in the same way as the adhesive strips that were removed previously.
Otherwise adhesion problems may occur.

Double-sided tape with polyethylene foam support, Scotch-Mount 9528

*BR00.45-Z-1197-02A

8

Install in the reverse order

Repair materials

Number

Designation

Order number

BR00.45-Z-1025-04A

Cleaner

A 005 989 19 71

BR00.45-Z-1197-02A

Double-sided tape with polyethylene foam support, Scotch-Mount 9528

3MDeutschland GmbH
https://www.3m.com