1 | Position dashboard carrier with dashboard. |
Ensure that the shift cables, the line to the ventilation box and the lines through the opening for the instrument cluster are routed properly. |
2 | Tighten screws (12) to firewall in engine compartment. |
Observe tightening torque in alphabetical sequence (A to F). |
3 | Tighten bolts (14). |
4 | Clip in covers (13). |
D68.10-1118-06
5 | Tighten steering column tube (7) with screws (6) . |
Do not move steering column tube (7) in axial direction so that steering column tube (7) cannot slip of the rubber grommet (arrow). |
D68.10-1111-01
D68.10-1112-01
6 | Install transponder coil (5) on steering lock and route connection line to opening for instrument cluster. |
The recess in the transponder coil (5) should engage in the groove on the ignition lock. |
D68.10-1110-01
7 | Hook spring (4) onto brake pedal and steering column tube. |
D68.10-1109-01
8 | Screw on ground connection (10). |
9 | Contact the electrical connectors (9). |
D54.18-1108-01
10 | Install protective mat (3). |
D68.10-1108-01
11 | Position center tunnel covers (2) and screw down with screws (8). |
First insert left center tunnel paneling (2). |
D68.30-1102-01
12 | Install floor covering (1) in footwell on passenger side. |
Turn bolt from position B to position A. |
D68.30-1101-01