Shown on model 907.733 with code D03 (Roof and rear-end doors, high version) |
1 | Rear roof frame |
D65.20-0023-06
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 910.6 with engine 780.703 | |
Danger | Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area. | ||
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | Model 910.6 with engine 780.703 | |
Topical note | General information on body repair | ||
| Remove | ||
1 | Remove all detachable parts in area of repair point. | ||
2 | Cover detachable parts that remain in vehicle with welding protection blankets. | Commercially available devices/tools | |
3 | Remove roof paneling rear section. | ||
4 | Remove rear roof frame (1). | ||
Commercially available devices/tools | |||
1K-zinc dust paint | |||
5 | Prepare rear roof frame (1) for installation. | ||
Commercially available devices/tools | |||
1K-zinc dust paint | |||
| Install | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
6 | Install rear roof frame (1). | ||
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
| 000 588 01 84 00 Welder | ||
| 000 588 02 84 00 Welder | ||
Commercially available devices/tools | |||
1K-zinc dust paint | |||
7 | Install roof paneling rear section. | ||
8 | Remove welding protection blankets. | Commercially available devices/tools | |
9 | Install detachable parts in the area of the repair point. |
Powiązane dokumenty
- ah0000n000501a Zabezpieczenia zapobiegające uszkodzeniom pojazdu lub jego elementów podczas spawania elektrycznego
- ah0000z030001a Ogólne wskazówki dotyczące pojazdów z instalacją wysokiego napięcia i/lub akumulatorem litowo-jonowym i/lub gazowym systemem napędu oraz osobistego wyposażenia ochronnego
- ah6000n000101a Ogólne wskazówki dotyczące napraw nadwozia
- ar6510d5760ts
- ar6520d100801ts
- ar6520d100802ts
- ar6520d100803ts
- as0000z000701a Zagrożenie dla życia przez wysokie napięcie przy spawaniu elektrycznym. Niebezpieczeństwo wybuchu podczas spawania w pobliżu materiałów łatwopalnych. Niebezpieczeństwo urazu na skutek odprysków przy spawaniu oraz promieniowania u
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.
- as0000z003501a Zagrożenie życia podczas prac przy elementach i systemach U >=30 V napięcie zmienne (AC) bądź U >=60 V napięcie zmienne
- as6500z000201a Zagrożenie życia na skutek spadnięcia z dachu pojazdu. Niebezpieczeństwo obrażeńprzez inne osoby, spowodowane przez przedmioty spadające podczas wykonywania prac w obszarze dachu
- ws6000p0021k
- ws6000p0022k