ar6520d100801ts

Remove rear roof frame

Typ ar · temat 65.20 · wersja 0100 · 2017-11-02

Dotyczy: Model 907.6/7, 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 65 Dach › 65.20 Rama dachu — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.39 Dach › 35.39.30 Poszycie/rama dachu — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR65.20-D-1008-01TS

Remove rear roof frame

Danger

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

AS65.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Model

907.6/7, 910.6

Repair materials

Number

Designation

Order number

BR00.45-Z-1056-07A

1K-zinc dust paint

A 000 986 28 00

The following operation steps are shown on model 907.733 with code D03 (Roof and rear-end doors, high version).

Remove rear roof frame

1

Expose spot welds on rear roof frame (1) (areas A, B, C, D, E, and F).



2

Cut off spot welds on rear roof frame (1) (areas A, B, C, D, E, and F).



3

Remove damaged rear roof frame (1).


D65.20-0024-06

Remove rear roof frame

4

Sand down mating surfaces to bare metal in cross-hatched areas .


Sand down spot weld flanges to bare metal on both sides.



5

Grind crosshatched areas around holes down to bare metal.



6

Remove shavings and milling chips.



7

Apply zinc dust paint to insides of spot weld flanges.


D65.20-0025-06

Powiązane dokumenty