ar6310s012003e

Prepare connection points of left side wall paneling with window cutout for installation

Typ ar · temat 63.10 · wersja 0201 · 2020-05-05

Dotyczy: Model 447.603 with code W16 (Window front left, fixed, in sidewall/sliding door) with code W29 (Window fixed behind) except code T19 (Sliding door left) Model 447.703 with code W16 (Window front left, fixed, in sidewall/sliding door) with code W29 (Window fixed behind) except code T19 (Sliding door left) Model 447.703 with code W16 (Window front left, fixed, in sidewall/sliding door) with code W32 (Rear passenger compartment electric pop-out windows) except code T19 (Sliding door left) Model 447.703 with code W18 (Sliding window front left in sidew./sliding door) with code W29 (Window fixed behind) except code T19 (Sliding door left) Model 447.703 with code W18 (Sliding window front left in sidew./sliding door) with code W32 (Rear passenger compartment electric pop-out windows) except code T19 (Sliding door left) Model 447.813 with code W16 (Window front left, fixed, in sidewall/sliding door) with code W29 (Window fixed behind) except code T19 (Sliding door left) Model 447.813 with code W16 (Window front left, fixed, in sidewall/sliding door) with code W32 (Rear passenger compartment electric pop-out windows) except code T19 (Sliding door left)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 63 Ściana boczna › 63.10 Ściana boczna — Seria 447 (modele 603, 703, 813)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 447 (modele 603, 703, 813)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 447 (modele 603, 703, 813)

AR63.10-S-0120-03E

Prepare connection points of left side wall paneling with window cutout for installation

Model

447.603

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W29 (Window fixed behind)

except code T19 (Sliding door left)

Model

447.703

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W29 (Window fixed behind)

except code T19 (Sliding door left)

Model

447.703

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W32 (Rear passenger compartment electric pop-out windows)

except code T19 (Sliding door left)

Model

447.703

with code W18 (Sliding window front left in sidew./sliding door)

with code W29 (Window fixed behind)

except code T19 (Sliding door left)

Model

447.703

with code W18 (Sliding window front left in sidew./sliding door)

with code W32 (Rear passenger compartment electric pop-out windows)

except code T19 (Sliding door left)

Model

447.813

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W29 (Window fixed behind)

except code T19 (Sliding door left)

Model

447.813

with code W16 (Window front left, fixed, in sidewall/sliding door)

with code W32 (Rear passenger compartment electric pop-out windows)

except code T19 (Sliding door left)

Modification notes

19.02.2020

First Infoblock and repair materials, added.

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Refer to the superordinate service document for further information.

Safety information in superordinate service document must be observed.

Prepare connection points of left side wall paneling with window cutout for installation

S63.10-6067-09

x

Dimension (approx. 15 mm)

1

Mark separating point on sidewall paneling (1) (area A).

2

Cut separating point on sidewall paneling (1) (area A).

3

Punch holes for MAG welding on side wall paneling (1) (area B).

4

Grind mating surface on side wall paneling (1) down to bare metal around holes (area B).

5

Remove shavings and drill chips.

Prepare connection points of left side wall paneling with window cutout for installation

S63.10-6068-09

6

Punch holes for MAG welding on side wall paneling (1) (area C).

7

Grind mating surfaces on side wall paneling (1) down to bare metal and around holes (area C).

Sand down spot weld flanges to bare metal on both sides.

8

Remove shavings and drill chips.

9

Coat insides of spot weld flanges with zinc dust paint.

Prepare connection points of left side wall paneling with window cutout for installation

S63.10-6069-09

10

Punch holes for MAG welding on side wall paneling (1) (area D).

11

Grind down mating surfaces to bare metal on sidewall paneling (1) in crosshatched areas and around the holes (areas D).

Sand down spot weld flanges to bare metal on both sides.

12

Remove shavings and drill chips.

13

Coat insides of spot weld flanges with zinc dust paint.

Prepare connection points of left side wall paneling with window cutout for installation

14

Grind mating surfaces on bottom section of rear side wall paneling (2) down to bare metal in crosshatched areas and around holes (area E).


Sand down spot weld flanges to bare metal on both sides.



15

Remove shavings and drill chips.



16

Coat insides of spot weld flanges with zinc dust paint.


S63.10-5996-06